Dwlace01
05-31-2007, 06:39 PM
Well, the time has come for me to get out of the hobby. I have only been in it long enough to build the 450 and practice a little on the SIM so everything is in excellent, new condition.
First things First,
The Heli is in great shape, there are tons of upgrades and, like I said, everything has just been assembled...no flight time!
The heli was purchased as a 450 SA about two months ago. Since then I have purchased the following upgrades for the heli from ReadyHeli.com. The following part numbers correspond with the readyheli part numbers.
HS1043 Stabilizer Set
HS1047 Tail Rotor Blade Set
HS1065-78 Metal Main Rotor Holder / Gray
HS1081-78 Metal Flybar Control Set / Gray
HS1108-78 Metal Tail Unit / Gray
HS1111-78 CCPM Metal Swashplate / Gray
HS1135-78 Tail Rotor Control Set Gray
HS1142-78 Main Rotor Holder (Gray)
HS1189-78 Metal Tail Holder Set (Grey)
HS1196-78 Metal Washout Base Gray (Replaced HS1143)
HS1207-78 Metal Flybar Seesaw Holder (GRAY)
HS1215-78 Metal Control Lever (Grey)
HS1250-84 450V2 Metal Tail Servo Mount TREX 450 V2
spares include (among other small hardware)
HS1003 Feathering Shaft Spindle
HS1034 Linkage Rod
HS1081-78 Metal Flybar Control Set / Gray
extra link ends for the ball links
all of the stock plastic that came installed on the SA
and other little odds and ends that you have to run to the LHS to get during a build
Basically, I have purchased all metal upgrades for the SA in order to make it equivalent to the SE.
TX/RX
I have a BRAND NEW HELI DX7 with the AR7000 rx. It hasn't even been powered on. Everything is still in box. This will include the TX, RX, batt pack and switch for the RX, wall charger for tx/rx pack, binding plugs and optional ratchet throttle hardware.
SIMULATOR
I have the Real Flight G 3.5 SIm that comes with the SIM transmitter with all of the cables that make it possible for you to use the DX7, among others, with the SIM.
LIPO CHARGER AND BATTERY
I have the CellPro 4S and a Thunderpower 25C 2500 mAh lipo. The CellPro comes with the board that allows you to charge the Thunder Power batts among others. Everyone knows about the charger and battery, they need no description. The Battery has only been connected to the esc once.
ELECTRONICS (all of which are brand new, and only used to build the heli)
3 x HS 65 MG
1 x Futaba 9650
1 x GY 401
KX850165A Align 430XL Brushless Motor (3700KV) RCM-BL430XL
Align K10304A 35A Brushless ESC
TOOLS AND OTHER THINGS ( all organized in a large tackle box)
Align Pitch Gauge
Deluxe Ball Link Pliers
GPMR6060 Loctite 242 BLUE (Great Planes) Threadlocker
Heli-Max Heli Ball End Tool
HZ046 Align Screw Driver W/ Two head bits
JR Ball Link Sizing Tool
pen drill with 8 bits
tons of servo arms and wheels for different servos
tons of extra hardware, screws
lube and servo grease
Heat Shrink and zip ties
wire mesh
xacto knife with extra blades
hobby mat
Homemade training gear. Made from carbon fiber rods meant for Kite building and Ping Pong balls.
Wing-tote bag for the Trex 450. The link is below.
http://www.wing-tote.com/medium_heli_bag.php
This is literally everything you need to get into the hobby and stay in the hobby. Everything is in excellent condition and needs a new home. I will have pictures available upon request through PM once I get home. As far as price goes, I have spent close to well over $1500 when tax and everything is taken into consideration. PM me with any and all serious offers and questions. If you would like to get ahold of me a little quicker, email would be the desired way of communications. dwlace01@louisville.edu.
First things First,
The Heli is in great shape, there are tons of upgrades and, like I said, everything has just been assembled...no flight time!
The heli was purchased as a 450 SA about two months ago. Since then I have purchased the following upgrades for the heli from ReadyHeli.com. The following part numbers correspond with the readyheli part numbers.
HS1043 Stabilizer Set
HS1047 Tail Rotor Blade Set
HS1065-78 Metal Main Rotor Holder / Gray
HS1081-78 Metal Flybar Control Set / Gray
HS1108-78 Metal Tail Unit / Gray
HS1111-78 CCPM Metal Swashplate / Gray
HS1135-78 Tail Rotor Control Set Gray
HS1142-78 Main Rotor Holder (Gray)
HS1189-78 Metal Tail Holder Set (Grey)
HS1196-78 Metal Washout Base Gray (Replaced HS1143)
HS1207-78 Metal Flybar Seesaw Holder (GRAY)
HS1215-78 Metal Control Lever (Grey)
HS1250-84 450V2 Metal Tail Servo Mount TREX 450 V2
spares include (among other small hardware)
HS1003 Feathering Shaft Spindle
HS1034 Linkage Rod
HS1081-78 Metal Flybar Control Set / Gray
extra link ends for the ball links
all of the stock plastic that came installed on the SA
and other little odds and ends that you have to run to the LHS to get during a build
Basically, I have purchased all metal upgrades for the SA in order to make it equivalent to the SE.
TX/RX
I have a BRAND NEW HELI DX7 with the AR7000 rx. It hasn't even been powered on. Everything is still in box. This will include the TX, RX, batt pack and switch for the RX, wall charger for tx/rx pack, binding plugs and optional ratchet throttle hardware.
SIMULATOR
I have the Real Flight G 3.5 SIm that comes with the SIM transmitter with all of the cables that make it possible for you to use the DX7, among others, with the SIM.
LIPO CHARGER AND BATTERY
I have the CellPro 4S and a Thunderpower 25C 2500 mAh lipo. The CellPro comes with the board that allows you to charge the Thunder Power batts among others. Everyone knows about the charger and battery, they need no description. The Battery has only been connected to the esc once.
ELECTRONICS (all of which are brand new, and only used to build the heli)
3 x HS 65 MG
1 x Futaba 9650
1 x GY 401
KX850165A Align 430XL Brushless Motor (3700KV) RCM-BL430XL
Align K10304A 35A Brushless ESC
TOOLS AND OTHER THINGS ( all organized in a large tackle box)
Align Pitch Gauge
Deluxe Ball Link Pliers
GPMR6060 Loctite 242 BLUE (Great Planes) Threadlocker
Heli-Max Heli Ball End Tool
HZ046 Align Screw Driver W/ Two head bits
JR Ball Link Sizing Tool
pen drill with 8 bits
tons of servo arms and wheels for different servos
tons of extra hardware, screws
lube and servo grease
Heat Shrink and zip ties
wire mesh
xacto knife with extra blades
hobby mat
Homemade training gear. Made from carbon fiber rods meant for Kite building and Ping Pong balls.
Wing-tote bag for the Trex 450. The link is below.
http://www.wing-tote.com/medium_heli_bag.php
This is literally everything you need to get into the hobby and stay in the hobby. Everything is in excellent condition and needs a new home. I will have pictures available upon request through PM once I get home. As far as price goes, I have spent close to well over $1500 when tax and everything is taken into consideration. PM me with any and all serious offers and questions. If you would like to get ahold of me a little quicker, email would be the desired way of communications. dwlace01@louisville.edu.