swollen align lipo 22c 2100mah

[Bull]

Hi All
I have 2 align lipo's one a 22c 2100 mah which has not been involved in a crash but yet it is puffed up. I can push it in but it puffs back out is it still safe to use seems to be holding a charge just fine. Next is a align 20c 2100mah that is starting to puff at the end where the wires enter the pack it has been involved in 2 crashes one pretty bad which pack was fine and a minor crash that wasn't bad just a boom strike, broken ball joint and pack was puffed at the end. I am useing a align balance charger rcc-4cx
for li-ion/li-poly. Also I have a MaxAmps li-po with a hyperion balance plug can I just put an Align balance plug on it and chrge off align charger?
Thx for any help :dontknow

[Bull]

32 views and no help????? :dontknow :arggg:

[txflyer]

i think the newer align 2100 packs do that. im not a 100% on that. but ive read something things late at night about it.

your going to need to find out the correct wiring for it.. if you have a multimeter, i think you would test each wire in the plug. on both packs. then make sure you solder the wires that much voltages. might want to do some reaearch on that.. in all honesty id get some tp packs and discharge those align packs. there is a thread about it around here.. .i wouldnt reuse a puffed pack..

[Bull]

thx txflyer
i was thinking of getting rid of them and getting new lipo's of another brand. called align they were no help what so ever. just hate to get rid of a pack i can use.
thx jason