Skiddz
06-07-2007, 01:57 AM
I've got a bunch of copper and fiber optic cable that was left over when I got out of the integration biz. Lengths as short as 50 feet as as long as 400+ feet. Tools and specialty equipment too.
Copper is all 24AWG UTP CAT3 and ranges from 100 pair to 2 pair, plenum and direct burial. I do NOT have any Cat5 or above UTP.
Singlemode fiber in 50u/125u plenum, non-plenum and direct burial.
Multimode fiber in 62.5u/125u in the same flavors.
I'll sell all cable at 50% of the current per foot cost, I just want it gone.
I also have 80 singlemode (50u) 3m CrimpLok ST connectors and the 3M CrimpLok termination kit in excellent shape - maybe 100 terminations total done with the kit - I primarily did fusion splicing when I installed fiber. 75% of current cost for connectors and termination kit.
1 AMP rackmount, 4U fiber distribution center, AMP p/n 559614-2 w/4 6-strand singlemode ST bulkheads. Opened but never used. 75% of current cost.
1 pair Greenlee 683 Spool jacks. 8.5/10 condition with no rust. These are $221 EACH brand new. I'll let the pair go for $225.
I have HUNDREDS of feet of 1.25" plenum innerduct with pull string. I will cut to length but would prefer to sell it all as one piece. Same deal as the cable, 50% of whatever the current cost is.
I also have tons of connectors, jacks, wall plates, service boxes, bus bars, punchblocks (66 and 110 style) D-rings, bridle rings, mud rings (the good Allentel ones, not those crappy B-lines) etc etc...
All of this stuff has been in a storage unit until 2 months ago (it's now in my garage) and is in excellent condition.
PM me or e-mail me at skiddz "AT" roadrunner "DOT" com if interested.
Copper is all 24AWG UTP CAT3 and ranges from 100 pair to 2 pair, plenum and direct burial. I do NOT have any Cat5 or above UTP.
Singlemode fiber in 50u/125u plenum, non-plenum and direct burial.
Multimode fiber in 62.5u/125u in the same flavors.
I'll sell all cable at 50% of the current per foot cost, I just want it gone.
I also have 80 singlemode (50u) 3m CrimpLok ST connectors and the 3M CrimpLok termination kit in excellent shape - maybe 100 terminations total done with the kit - I primarily did fusion splicing when I installed fiber. 75% of current cost for connectors and termination kit.
1 AMP rackmount, 4U fiber distribution center, AMP p/n 559614-2 w/4 6-strand singlemode ST bulkheads. Opened but never used. 75% of current cost.
1 pair Greenlee 683 Spool jacks. 8.5/10 condition with no rust. These are $221 EACH brand new. I'll let the pair go for $225.
I have HUNDREDS of feet of 1.25" plenum innerduct with pull string. I will cut to length but would prefer to sell it all as one piece. Same deal as the cable, 50% of whatever the current cost is.
I also have tons of connectors, jacks, wall plates, service boxes, bus bars, punchblocks (66 and 110 style) D-rings, bridle rings, mud rings (the good Allentel ones, not those crappy B-lines) etc etc...
All of this stuff has been in a storage unit until 2 months ago (it's now in my garage) and is in excellent condition.
PM me or e-mail me at skiddz "AT" roadrunner "DOT" com if interested.