Missing kit parts?????or are they???????

[Degzie]

Hello guys, Happy New Year..........!

Refer to drawing 12H fury tempest drawings package.

The kit arrived with the PN 0135 short ball links missing but an extra set of PN 0133 ball links.

1) is this normal?
2) should I build it using the longer links & still use the 1.5 MM gap?
3) OR should I just cut down the 0133 links and use them?

Suggestions/comments greatfuly accepted. Thanks.

[Bonsai]

0135 are the long balls..these will make sure that your short 313 rods are pretty much stright...the 0133 are short balls and go to the tracking rod. I have these on hand if you are coming this way
I wouldn't deviate. CAll me if you'd like 011-965-678-1990
Dean

[Kyle2Baseball]

I was building my new fury extreme and I waited ti get the new clutch and open tail case but when I got to the tail case it was the old one? :arggg: :bomb:

[DavidH]

Cut the 0133 links and use them. You can cut them about 1mm from where the link goes back into the shank part of the link. This should be about 5mm from the end of the link.

David

[Bonsai]

I miss understood I thought you were refering to the Balls..but you are talking about the ball links.. I have these too..but as David said just cut them..
Dean

[Degzie]

Thanks Guys.