Spectra G T/R Build Question

[Joe Ubaldo]

Page 46, section C of the build manual states...

C) Connect the two pitch pivots #0859-16 to the hole in the arm of the T/R blade mounts
using two M2X10 socket head bolts #0049. Use slow CA adhesive on the tip of the bolt,
taking care not to let any get into the bearings. Tighten securely.

My question is which one of the two holes on the T/R blade mount should be used?

Thanks in advance.

Joe

[hercdriver7777]

The ones that create the bump in the TR grip.

[DavidH]

Yes use the hole that is NOT in line with the blade grip pivot. As mentioned the hole that forms the hump on the lever part of grip.

David

[Joe Ubaldo]

Thanks guys!