PDA

View Full Version : razor gearing questions fo those who know


bathmagic
06-09-2007, 05:57 AM
Guys i have got my razor hovering today to break the packs in

now my question is

in heli fixed end point mode i only get 1980 HS @ 100% flat throttle curve

i tried govenor mode ( high ad low settings) and at 95% i had 1890HS
now i know the gov needs to be under 85% ish (per finless vids)

i tried all the setting on the speedy (yes i set it up in the same procedure as finless vids with the castle link)

the current gearing is 9.6:1 ( the one that came with the kit)

so if i am thinking correctly i need the 8.8:1 to get my headspeed up to 2100-2200 and then put it in govenor mode at around 80-85% so i have some head room?

current set up is

Hacker A50-14s
CC 85
flight power 10s 3700's ( 2 x 5s actually)

so can someone tell me the correct gearing to get this thing to be a power house ?

im not after flight duration, I want max go !

thanks in adance

Dale

Aussieheliguy
06-09-2007, 06:13 AM
Hey Dale

Did Glenni give you my number?

Aussieheliguy
06-09-2007, 06:42 AM
Hey Dale can you confirm the k/v is 425?

Aussieheliguy
06-09-2007, 06:48 AM
Hey Dale

The recommended ratio is 8.72 at MA site

Aussieheliguy
06-09-2007, 07:07 AM
Dale did you set the end points on the radio to match the speedie sounds like you may not be getting full throttle

MrMel
06-09-2007, 09:27 AM
A50-14s is 550kv

With 9.6:1

RPM at low load: 2056 at 37 volt
RPM at medium load: 1917 at 33,4 volt
RPM at full load: 1778 at 32 volt

With 8.8:1

RPM at low load: 2243 at 37 volt
RPM at medium load: 2092 at 33,4 volt
RPM at full load: 1940 at 32 volt


I would have run 8.8:1 or even lower if possible, depends on how good packs and how good performance required...

bathmagic
06-09-2007, 10:31 AM
the grear ratio tht came with it is 9.6:1

yeh they are new packs/new machine on a fresh charge it would hit 2050 but then after a mintue or two back down in the 1900's

i really want somewhere around 2100ish HS for fast snappy performance

would i be better buying a Neu 15152y ?

i did set the end points on the speedy as per finless videos so im sure this is right

should i just get the 8.8:1 ratio ?

Ausseheli guy no he didnt give me your number can u PM it to me please


Mr Mel for this thing to rock should i go 12s ?
as i only have 4 packs at the moment so before i go and buy more, shall i go 12s ?
how much more go will it have ?
what sort of flight times ?

thanks Dale

mudbogger2
06-09-2007, 11:56 AM
so can someone tell me the correct gearing to get this thing to be a power house ?

im not after flight duration, I want max go !

8.72:1 is what you want. Govern it to 75% and it will rip.