PDA

View Full Version : Minipyro 20-08


GMAURO
02-15-2012, 04:23 AM
Anyone have a picture of one original minipyro 20-08 stator? I've found one used of this motor, but have some doubt regarding the winding.

Thanks for help
Mauro

powercroco
02-15-2012, 04:47 AM
it's the same stator as is used in kora.
difference:
kora has 14poles and a thin ring bearing,
pyro has 10 poles and no thin ring bearing.


I have winded a lot of them, but I never have made a special site about it.
some kora winds :
http://www.tuning.powerditto.de/

minipyro = kora shape:
http://www.tuning.powerditto.de/12N14Pkora15/100_6569.jpg
32mm plate diameter.
4+4 x1,18mm is possible.
other winds look into the linked kora sites.
serial is 4+4x1,06D with thick 300C insulation.