Lepton 5S: Kora 15-14 or Kora 25-10?

[enry74hh]

Kora 15-14 (790 rpm/V) is Ok but what thoughts of the Kora 25-10 (650 rpm/V) ?


By, Enrico.

[gosha]

Weight matters. I vote for 15-14.

[Jafa]

Your choice, 4S or 5S

Don't think I've seen anybody using the 25-10

[enry74hh]

Your choice, 4S or 5S

Don't think I've seen anybody using the 25-10



Lipo 5S

with 15-14 20T pinion

with 25-10 24T pinion

By.

[prototype3a]

Do you have a source for the 25-10? I'd be very interested... Although I really ought to sell at least one of the other 2 motors I have for my lepton... ;-D

[docjoe]

I just started using 5s with the 15-14 and 22T pinion and running around 2700 head speed with 85% throttle. I think this is my most favorite setup with the Lepton so far. Doesn't seem to want to bog like on 4S. I am thinking about increasing the head speed as well.

[prototype3a]

Don't go over about 3100 rpm or you'll have some vibration problems ;) I'm surprised you're getting only 2700 with that setup. I'm using a 20T right now and otherwise about the same. I've been considering dropping down to a 19T to see if it'll become unbogable. I've learned that sometimes it's good to have that sort of brute force power should you mess up and need a lot of power to keep from hitting the ground. My problem is that I'll usually be in the middle of a high power maneuver and it's as if the system just can't keep the extreme power output up.

[skurniaw]

Right now I am using KORA 15-12 with pinion gear 26T. The speed control is Jazz 55. It's really fast even at 75% of the speed control. There is no sign of bogging. I do not have the 20T pinion gear with me. Have anybody use this set up before ?

[rotodingo]

I hope you are using 4S... This setup with 5S will give an insane headspeed. Safety first...
Try the 24, it will be fast enough with the stock 24T and 85%. Order the 20T pinion quicly if you are using 5S. And 18-19T too.

Nicolas