HK-4035 12N10P winding project

[ZuvieleTeile]

Geez, the door bell rang.
This time USPS showed up and guess what?
My HKlll-4035 kit arrived.:bacon

What a weekend. (My Knipex tools arrived just a minute earlier and have to be ground down now)
I can only hope my Missus has no additional chores for me. . .

And btw. the stator has a very thin black coating. Looks like Loctite 410.
Probably just for optical or rust prevention reasons.

[HeliFX]

Where did you order the 4035 kit ?

Didn't realize you can get kits with magnets installed.

thanks


Geez, the door bell rang.
This time USPS showed up and guess what?
My HKlll-4035 kit arrived.:bacon

What a weekend. (My Knipex tools arrived just a minute earlier and have to be ground down now)
I can only hope my Missus has no additional chores for me. . .

And btw. the stator has a very thin black coating. Looks like Loctite 410.
Probably just for optical or rust prevention reasons.

[powercroco]

actually all the kits in the scorpion web shop comes with installed magnets and balanced rotors.

the black paint coating is the rust prevention.

[ZuvieleTeile]

I ordernd directly from Scorpions website. Needed about a week.
The US dealer did not have it in stock.

[GMAURO]

Congrats ZT. This motor is very good (HKIII), refined stator, Big and optimized magnet. My last 4035 is winded with 1.5 mm wire 6+5 YY for 510 Kv tested with HW 120A HV speed controller.

This is a good motor for first experience and for take amazing performance.
Good work
Mauro

[HeliFX]

Here a link to 4035

http://www.scorpionsystem.com/catalog/bl_motor_kits/hkiii-40_kits/HK_4035_Mkit_12N10P/

[Stolla]

Zt, you decided which wire size and kv for this motor yet?

[ZuvieleTeile]

Zt, you decided which wire size and kv for this motor yet?

Not really. . .:roll:
I see you having 1.25, Mauro wound one with 1.5 and there have been others, but I forgot.
I have ordered 0.8 (for playing and Kv testing) 1.02, 1.25, 1.32, 1.4 and 1.5mm.
Since I am a rookie, I'd say, I start with 1.25 and see how it goes.

[Stolla]

that's a good idea the 1.25 was my first as well, then the 1.32 my motor of choice, for the 510kv range it's also easy motor as 6+ 6 fits nicely in the slots.