AR7200BX + MultiGov Pro + Switchglo + DSX9/X9303

[crash-alot]

I changed my beastx for a AR7200BX but now I'm stumped on how the get my AR7200BX, Multigov Pro and Switchglo to work together on my DSX9/X9303. It worked fine with the beastx but the AR7200BX forces you to use the Gear channel for your gyro gain which on a X9303/DSX9 means you loose your Governor menu.


Does anyone have the same combination and got it to do the following?:
1. Governor selecting different head speeds on F.Mod switch
2. SwitchGlo selectable on Aux2 switch to avoid hot starts

[KC36330]

i only use my 9303 for buddy boxing the jets so i'm not all that up on the programming but you could use the gyro feature to control the governor and the governor feature to control gyro, they'd just be labeled wrong in the TX screen.

you could also mix rudder dual rate to the gear, this would give you the gyro gain via the rudder dual rate switch and then just use the gov screen for the gov.