Different settings on washout base and metal arms

[Lottomunch]

I purchased a used raptor 50 and it came with what appears to be the older version of this washout base and arms.

http://www.heliproz.com/prodinfo.asp?number=804185

My arms also have two holes per arm and am wondering which setting gives the mild and which gives the wild.

Anybody know?

Thanks

[LAMAR COOLEY]

Lottomunch,
" FLYBAR CONTROL LEVER " ( #BK0015 = #PVO004 )
I don't know which Raptor version you have.
However I'll use the Titan 50 manuel as a reference for you.
The inner ball location is generally used for mild flying and beginner
control response.
The outer ball location is normally used for a 3-D set up. Allowing for a quicker
response to left / right cyclic ( aileron ). As it is linked to the fly bar cage
or mixing lever ( BKO006 = PVO004 ) via the
hoop (BK0007 = PVO005 ).
For those who are not familier with this. The other end with one hole is
connected to the swash plate (BKO092 =PVO092 ) via the washout link.
( BKO016 = part of washout set ( PVO503 )).
Also their is no top or bottom, as the levers are symetrical in shape. The levers
longest half's should be opposite each other as connected to the wash out base
(BKO014 = PVO503 set )
Hope this may be of some assistance.
I listed the parts reference numbers in order to aid in ordering.
Regards. :D

[Lottomunch]

Awesome. Thanks Lamar,

Plus. I'm embarrassed to say I was rereading the Raptor Titan review stickied up top and it also tells. I don't know how I've missed it. Read the review once before.

Thanks for the info. I searched but the answer is so ovbious it must not be discussed. I'm a moron.

Daniel :oops: