Using Sub trim

[buster1]

In switching over from Futaba 8 channel to new 9z radio, I went back and starting resetting up my models,
One that was just fixed from a crash,
In setting up the servo horns to get 90 degrees all around at 1/2 stick, I used some subtrim to exactly center the servos at 90 - I couldn't get the servo horns on exactly at 90, so I had to use some subtrim,
Does anyone see this as a problem - It doesn't look like it to me, because I was able to get the swasplate to function without any interatction.
Any help would be appreciated,
JH

[the collective]

It shouldn't be a problem, that's why subtrim is there. If you're only using small amounts to get the arm just on, you'll be fine, if you're using huge amounts of subtrim then you might run into some non-linearity issues.

Any good flying sites around NYC? I'm in Queens, but always looking for new places and people...