JR9303 Help

[Helodad]

Stupid Question? look at the pic I know where AL,THO,ELV servos go in RX but where do collective and the Gyro. My FUT401 has 2 extra leads and the switch plate it has 2 connectors on one side and one on other? The Manual is NO HELP. If any one has one who does not mind giving me your number I would like to call Thanks Jim

[Raptordude]

Collective is AUX1, Gyro gain lead is AUX2 or whatever switch you want. The other lead plugs into the rudder slot, and the rudder servo plugs into the other lead with female end. Dont forget to turn on the Gyro Sensitivity function in the menu in the radio. If you have a airplane version radio, which it soulds like you do, you need to get the heli instructions off of Horizon Hobby's web site. IF you need anymore help, feel free to ask.

[Helodad]

Thanks RAP, I have the HELO ver its does not show Rx info. I just need step by step inst thanks for info it help me get started.

[bighands3d]

what i do on mine is select the D/R rudder switch to be my Gear switch. then plug in the yellow wire from 401 to gear, and the gyro works best this way. with the 601 or any futaba gyro on the JR radios... I haven't used the gyro sensitivty with the futaba gyros.. the gear travel adj and the rudd travel adjust will fine tune you set up.. gear atv will set gain values and the rudd atv will adjust you tail speed. more atv faster piro.. I don't use the gyro sensitivty function on mine haven't found a need for it HH gyros.

need any more help
706 570 5786

[Rodney]

Hey there. Where in florida are you? I would be gald to help. Give me a call at 407-729-6717. Or nextel 162*4099*331. Rodney

[Helodad]

Daytona. I will try reach you on nextel Jim