Fusion 50 vs Beam AvantGarde 600

[mswify]

Guys,
I'm buying a new Heli and I'm limiting my options to the Fusion 50 and the Beam 600,
I really can't decide, and the reason that I'm a bit biased towards the Beam is the gears stripping problem with the fusion, I need your help on this one guys


I'll be using the below equipment:

Jive80
Vbar
Scorpion 4035-560
Cyclic 8717 - Tail 8900

[irishmatt18]

F50... So versatile. Can make it smaller or run bigger blades.

[Slyster]

Stripping issues have been solved with the new CNC delrin gear and see the sticky for more info on TT gears. Its a solid heli now even when over powered with 700 sized motors etc. and with Tareq and Berk Kammerer on board the future looks promising.

[mswify]

So the new CNC delrin gear included with the new kit? or I'll have to buy it separately?

[Carapau]

The CNC gear would have to be bought separately however I truly feel that if you are sticking to a 600 class motor there is no need to use the CNC gear. The issues of shipping tail gears should now be a thing of the past.

Trying to put all bias aside, I adore my Fusion however the Beam looks like one hell of a machine. Have a look on their forum to get a good feel of how it is getting along.

[mswify]

Guys, I'll buy the F50, but I need to ask you what pinion to use?
is this one (Steel Pinion 15T 0.8M 6MM Shaft) OK?

[cmezip]

If you run the 560kv motor the stock pinion that comes with the kit should be perfect. It's a 13 tooth. I run my headspeed @ 2150 using it

Sent from my SPH-D710 using Tapatalk

[mtymyk]

Guys, I'll buy the F50, but I need to ask you what pinion to use?
is this one (Steel Pinion 15T 0.8M 6MM Shaft) OK?

best way to check is to use this headspeed calculator http://www.readyheli.com/headspeed-calculator.html
using the Jive in Mode4, whatever headspeed you wish to run, try to keep the TC% between 60-70%, this HS calculator will be helpfull