PDA

View Full Version : Brass spacer question


ifly_65
03-02-2012, 12:39 AM
The brass spacer that supports the tail shaft, which sits in the tail box is loose and is sliding down the tail shaft providing no support.

What should I do to keep this in its spot in the tail box?

GravityJunkie
03-02-2012, 12:38 PM
My bird has this same issue. Hopefully someone will chime in.

dpelletier
03-02-2012, 01:54 PM
Green loctite?

ifly_65
03-02-2012, 02:05 PM
I used a tiny bit of JB weld on the tail shaft and brass spacer. I was careful not to get any on the tail box so the brass can spin. I then removed as much as possible with a toothpick so the tail slider move all the way to the end at the tail box.

GravityJunkie
03-03-2012, 10:41 AM
Come on guys. Any more input into this. Is this normal? If not, how is yours held in place. I really don't want to be gluing things up. Mine slides on the shaft. It does seem to have an issue with binding the tail, but it doesn't seem to be a good thing sliding around.