anteater831
06-22-2007, 03:38 AM
I installed my servos and gyros to the receiver. Somehow the Aeleron servo is not moving. I set it using the 120 mode. What am I doing wrong? Anyone have setup tips?
jgb2000
07-24-2007, 10:42 AM
You may want to do three things first.
1. Connect your non-working servo into a working channel just to discard the possibility that the servo may be damaged.
2. Check that you EPA in the aileron channel is not at 0%.
3. Check that you have connected the non-working servo in the right direction. All black leads should be aligned in your receiver.
This sounds like a connection problem more than TX setup. Let us know how it goes.