View Full Version : G3.5 helicopters won't throttle up
BblackhawkK
06-23-2007, 02:50 PM
I had this problem that my G3.5 helicopters won't throttle up when i increase my stick. The rotor blade will stop moving as it seems that the engine is dead. I don't have any problems for aircraft and electric helicopter. By the way, i'm using a 4 channel transmitter with usb cable.
Helps will be much appreciated!! :mrgreen:
BarracudaHockey
06-23-2007, 08:58 PM
Throttle hold is activeated in all likelyhood. If its g3 then you have the transmitter that came with it, use that.
BblackhawkK
06-23-2007, 10:21 PM
My interlink transmitter is defective. So any keyboard shortcuts to disable the throttle hold?
BblackhawkK
06-25-2007, 12:13 PM
anyone knows?
Bayou Talker
06-25-2007, 01:52 PM
Try posting a request at www.knifeedge.com They should be able to help you as they make the software.
mister2u
06-25-2007, 05:42 PM
If your interlink trasmitter is defective, you can send it in and they will replace/fix it for you for free. It should be under warranty. I had a problem with transmitter and they sent me another one.
BblackhawkK
06-25-2007, 07:43 PM
Mine no longer in warranty. :(
mister2u
06-26-2007, 07:37 AM
:(
Bayou Talker
06-26-2007, 06:37 PM
You should be able to use your transmitter with G3.5. Ask about your problems at Knife Edge. I am sure somebody will be able to help you out.
zeese5
06-27-2007, 02:29 AM
I'm having the same problem. However, only in training mode.
In normal mode, everything is fine.
Any suggestion?
BblackhawkK
07-07-2007, 03:58 AM
ok, i have managed to change my radio. Works great now... :glasses2: