Titan Carbon Blades

[rnew4779]

I have A raptor titan 50 and want to replace the standard woodys which are 600mm looking at some sab carbon blades but don't know if i sould go for 600mm or to go for the 620mm set.

I am still learning am flying solo and just flying about no 3D yet!!

any help would be great.

[mike557]

Hi there. either will do. The Titian is a tad longer than the SE so the 620 are made for it. However be prepaired for the price, can be expensive if you are still a novice. Dont ask me how I know

[LAMAR COOLEY]

Hey, rnew4779,
What's up in the great U.K.?
I'v been useing "Mavrick" 620 Carbon blades and I LIIIIIICK UM.
Don't know how big a hurry you're in but.
Check out "Heliproz" site. They ship anywhere.
I found the price to be very reasonable for carbon fiber blades.
Of course you could pay a lot more.
I don't know your engine type but I'm running an OS 50 Hyper. This sweet
little engine can handle the 620's well. If I recall correctly :dontknow the
600's are the same price as the 620's at H.P.
If you are flying about then your ready for some carbons :wink:
I hope this may be of some help
Regards from Houma, Louisiana :lol:
I bet it rains more here than there :!:

[BarracudaHockey]

Thunder Tiger 600mm blades will be fine. 620's are nice but you are a few blade sets away from knowing the difference.

[rnew4779]

Cool thanks for all you advice i think am going to go for the 620mm blades as the cost is about the same. 42 pound for 600mm and 46 for 620mm so not a lot in it really.

what i do know is i don't what woodys after what happened the other day

once again thanks for all your help.

[ferincr]

I just read an article in MHW magazine (I think is the one before the last issue, sorry I get them quite late here) and they compared six different brands of blades, I know that if you still learning probably the best choice would be the cheaper ones, but if you can still get the mag (may be at some hobby shop there) it's quite interesting.

[rnew4779]

thamk for that will have a look in to it

cheers

[ferincr]

As I said, probably the best choice would be the cheapest ones but, they mention under what name the Mavvrick are sold over there (I think it's GCT) and TT were made by BBT (not any more, aparently).

[avatar71]

do the 620 blades require a different gear ratio? Maybe not require but, do better with??

[rnew4779]

i dont think so the titan was made for 620mm blades but comes with 600 out the box.

Well thats what ive been told, so it could well be wrong. :glasses2:

[BarracudaHockey]

620's are fine on the 8.5 gears.

The titan CAN swing 620s but as rnew says, ships with 600mm wood blades.