Mini Titan E325 fitting an Align 3700KV Motor

[sfbloke]

Help,

I have purchased a Mini Titan E325, as the full electrics kit was not available I decided to purchase the Align 35A ESC and 3700kv motor. Just finished assembling the beast and cutting a very long boring story short the motor spins up the helicopter backwards. What have I doen wrong.

Thanks

SF Bloke

[Gardner]

is your one way bearing upside down?

[fire_paramedic]

reverse two of the motor wires, which will change its direction

[sfbloke]

reverse two of the motor wires, which will change its direction

Hi

thanks for the info do you know what wires to swap?

SF Bloke

[Funky]

Just swap any 2 motor wires, it doesn't matter which ones. I run the same combo in my Mini Titan and if you match up the colored wires the motor runs backwards.

http://www.helifreak.com/album_mod/upload/e899a8676e2415d9d30578e5d43a6644.jpg

[fire_paramedic]

yep, just like Funky said, any two wires will do the trick.

[sfbloke]

Thanks to all that replied.

SF Bloke

[Tim Tompkins]

I do love this motor too but beware it takes juice. I limit my flights to 6 mins. with the flight power 2170 packs I have. TimT

[nen77]

hy all
a ihave 2 miniT
on first i have stock motor and esc -it flyes well
second one i have it without motor |(i upgraded totaly the head and tail)..i try the 420 from a t-rex xl and it looks like having slow perfomances (with his original25a esc)
a also have a axxi 2212/12 wich can be used for a heli did someone tested minititan with this 2 kind of motors?
i dont want for second one to use a standard motor i need to try something new

pls any sugestions
br