Custom Heli Parts - New Fins & Servo Arms

[readyheli]

Have a look at some new designs, plus servo arms that will keep the linkages perfectly symmetrical.

[HighNear90]

John,

Are these going to be available on the website soon?

Thanks,
Leo

[readyheli]

oh yeah.

;-)

nice beefy 2mm stock too. I already found out the stock self-tappers are too short, so will need to order us all some good hardware.

[Finless]

Where's mine?

Bob

[readyheli]

u like the swoosh or non-swoosh?

lol.

[Finless]

Either way! I aint picky ;)

This will certainly help for people having tail weight issues! Those still runing stock with 2200 packs for instance.

Bob

[celter]

Am I the only one that thinks that the horizontal fin is a bit undersized for this heli? I am of course speaking of aestetics.

[Skaross]

With the servo horn overlays, can you do them both straight holed and offset?

With the metal upgrade parts, it is easy to remove the hole offset (with the metal elevator you have no choice - it is straight holes only) and these would be great for both setups.

Kev

[rc-hq]

Am I the only one that thinks that the horizontal fin is a bit undersized for this heli? I am of course speaking of aestetics.


I was thinking the same thing... at least in the picture it does look a bit small.

[arclite5]

The stock one is even smaller.. Since the boom is the same diameter, I'm going to assume that you could most likely get away with using the T-Rex 600 horizontal fin if you wanted a bigger one..

-Kyle