New Align parts for the 600N

[matrix1171]

anybody know when the new spektrum servos are coming out? word is that they are 200oz @ .04 transit and you can run them in a unregulated lipo setup

[torkboy]

I am running mine on a 2 cell FP lipo direct with no voltage regulator so the speed and torque values are a bit higher.


Yes I have heard people doing this as the AR7000 RX can also handle the 7.4v 2S volatge. Kinda scary to me (my problem) so I will let you guys run for awhile and see how things fare longevity wise before I make that step.

What are you doing to drop voltage to the gyro and tail servo?

Bob

I think they are using those Align step down ones, I know thats what I would use. Well see what ticidytoc has to say. :wink:

[ClayK]

Anyone know what online vendors have the new parts??

Quoted for attention.

[Ticidytoc]

Clay: Have you tried Modefosheli or Rediheli ? They should have these now.

torkboy: You would have to use more than one diode to step the voltage down from 8.4 to 5.1.

I'm using a regulator to drop the gyro voltage.

[Ticidytoc]

Yet even more new stuff!

Nice job Align !

[malc1]

What was wrong with the old engine mounts then ? :dontknow

[Laddy]

It looks like these are machined out on the side in case your Motor case rubs on the standard ones.

[torkboy]

Clay: Have you tried Modefosheli or Rediheli ? They should have these now.

torkboy: You would have to use more than one diode to step the voltage down from 8.4 to 5.1.

I'm using a regulator to drop the gyro voltage.

What regulator are you using then?

[ClayK]

Clay: Have you tried Modefosheli or Rediheli ? They should have these now.

torkboy: You would have to use more than one diode to step the voltage down from 8.4 to 5.1.

I'm using a regulator to drop the gyro voltage.

Wes didn't have anything, but ReadyHeli did. Found most of what I wanted, just no fan and that's the biggie that I wanted.... :?

[Ticidytoc]

Clay, I'm running the 3dx fan from Ricks. It work really well and the rice is right. Give it a try.

Torkboy, PM sent.

[G MAN]

anybody know when the new spektrum servos are coming out? word is that they are 200oz @ .04 transit and you can run them in a unregulated lipo setup

Talk about an overkill,.15 servo's are more than enough for this heli.DOUG

[Mercuriell]

More bits on the way - nice red boom and sleeve for the feathering shaft - no idea what that's all about !

[WayneBrown]

Marcus Kim has been flying the Align muffler for awhile, it's QUIET and seems to make good power.
HC is already running the spektrum servos and Logictech 6100T on 7.4V. can you say FAST??

[ShuNut]

Anyone know if most of these parts will be standerd in new kits ?

[eric268]

pretty cool how they have a Curtis pipe on the heli showing off the red tail boom and have all those align pipes sitting right there?!?!

[sbmon]

And the infamous black leather couch.

[Ticidytoc]

Yet more BLING on the way !

Frame supports , 90° dampeners, and some sweet bearing block BLING !

Is it me or is the nitro getting heavier ?? :thinking

[mschaffe]

Hi,
where can I get this new add ons?
Max

[msoward]

Hi,
where can I get this new add ons?
Max
New options not availible yet but they are listed on RcHover just not in stock. Hope 1st of next month, but also may be different for Austria.