View Full Version : New Align parts for the 600N
Ticidytoc
06-29-2007, 01:28 AM
Looks like in addition to the white plastic canopy we will have a yellow one to choose from.
Also, the grommets have been changed to hold up to the nitro fuel.
For those that are taking TT gears out all the time there is a multi pack available now.
The tail rod guides have a 4 pack now with a new design.
aamwood
06-29-2007, 09:06 AM
Thanks for the info. That's what I like . Yellow canopy !!!
torkboy
06-29-2007, 12:52 PM
Whats different about the tail rod supprot guides?
Tintin
06-29-2007, 01:20 PM
Longer
torkboy
06-29-2007, 02:53 PM
I didnt notice a problem with the current ones?
Tintin
06-30-2007, 07:51 AM
If you look along the pushrod it's probably not going in a straight line
scottc
06-30-2007, 08:32 AM
when or were can i get the yellow canopy and the tail rod guids.
Ticidytoc
07-09-2007, 04:31 PM
The hits just keep coming. :mrgreen:
malc1
07-09-2007, 04:42 PM
Whats the purpose of the new servo discs?
erniefritz
07-09-2007, 05:02 PM
looks predrilled to the correct spacing with a captured nut and a 8 point star pattern to get your servo's at as close to 90 without subtrim... :noteworthy
Ticidytoc
07-11-2007, 12:26 AM
Yeah, I think the servo discs are a slick idea. with the holes already there, it will be a snap to get them spot on.
OICU812
07-11-2007, 05:02 AM
Muffler looks like a JK "Hatori" selloff? Wonder if he sold them rights to that....?
fsusmithc2
07-11-2007, 02:50 PM
I saw a picture of the muffler on www.thetrexforums.com showing it anodized blue. I'm confident it's a Hatori re-branded, same as the Align Hyper 50 they'll be bringing out eventually.
Ticidytoc
07-23-2007, 03:33 PM
A new metal fan.
helibird
07-23-2007, 06:56 PM
Looking at the muffler they should have left it two pieces. If anyone has seen the SB-50 muffler it's huge and putting something that long bolted directly to your motor seems like asking for a bent pipe or a cracked engine block. I've had a couple crashes where it came down on the skids and the muffler was rotates upwards as the skid flexed and broke. Just my 2 cents.
Mercuriell
07-24-2007, 04:46 AM
Cool that ALign are including two magnets with fan :)
aamwood
07-24-2007, 12:11 PM
Now, I changed my mind . I just want the Align metal fan hahahahaha :)
Ticidytoc
07-28-2007, 04:16 AM
Got some of my new goodies installed the other day and finally got around to taking some pics.
Finless
07-28-2007, 01:00 PM
I just picked up the new servo wheels too for my 9000's.
These are cool for sure! I will be using them in my vids.
Bob
malc1
07-28-2007, 01:41 PM
Well cool :glasses2:
Just fitted a spare one to my throttle servo - zero subtrim for me :wink:
Bobbyk
07-29-2007, 08:14 AM
Is the 9000's a new servo and where do you get them from, what are the specs?
ClayK
07-29-2007, 09:43 AM
Anyone know what online vendors have the new parts??
malc1
07-29-2007, 11:55 AM
Is the 9000's a new servo and where do you get them from, what are the specs?
I think the 1/8th scale R/C buggy drivers love these servos.
Looks like there are a couple.
Z9000S (0.10 sec transit time)
Z9000T (300oz of torque)
http://www.amainhobbies.com/index.php/cPath/1_61_100
Don`t know if they are meant for heli`s though :dontknow
Ticidytoc
07-29-2007, 12:36 PM
I'm using the z9000s servos which are rated as follows: Torque: 112 oz/in @ 4.8V, 128 oz/in @ 6V Speed: .08 sec/60° @ 4.8V, .06 sec/60° @ 6V . I am running mine on a 2 cell FP lipo direct with no voltage regulator so the speed and torque values are a bit higher. :wink:
Finless
07-29-2007, 12:53 PM
I am running mine on a 2 cell FP lipo direct with no voltage regulator so the speed and torque values are a bit higher.
Yes I have heard people doing this as the AR7000 RX can also handle the 7.4v 2S volatge. Kinda scary to me (my problem) so I will let you guys run for awhile and see how things fare longevity wise before I make that step.
What are you doing to drop voltage to the gyro and tail servo?
Bob