Tempest canopy on Fury ??

[rchflyer]

Can you use a Tempest canopy on the Fury Extreme??

Any additional parts/pieces needed, and tips for a quick install.

Thanks in Advance,
Dennis

[DavidH]

Yes you can use a Tempest canopy on a Fury.
You will need (2) 122-27 Rear Canopy Hex Spacer mounts.
Also (2) 0089 3m X10M Hex bolts
You will need the Canopy thumb screws to hold the rear of the canopy on to the post.

The standoffs will replace the bolts on each side of rear vertical channel at the very top of the frames.

Simple install take the bolts out of the top of the channel. Stick a 3X 10 Hex head bolt in the hole from the inside of the channel. Screw the canopy spacer mount onto the screw. That is all there is to do.

David

[rchflyer]

Thanks David.

[Clintstone]

I run the Extreme Canopy on the Tempest, I had quite a few canopies and did not want to loose them yet.