Question on a GY401 and a JR8103

[Mav]

Hi There I am new here and I am getting back into Heli's after some years from being away from them. anyway the question is I have a GY401 and a Jr8103 Radio in my Rappy 60 and in HH mode when I move the stick in either direction and let let go of the stick the tail servo will move back to center a little and then stop, it does not get all the way back to center it moves some but not all the way back.. is this normal for this?? I thought in HH mode it would just stop where you put it no start to move back to center and stop.

Thanks

Mav

[Mav]

No One Has an answer??? Any help would be great...

[BarracudaHockey]

Where do you have the end points on the radio set, and the limit pot on the gyro?

[Mav]

Thanks for the reply Andy. I set it us as per Raptor technique ends are at 100 and the limit is at max .. IF I turn down the limit toy about Half it works alot better but i loose travel. I guessI could move the ball link to the outside hole..

Thanks
Tom

[BarracudaHockey]

Use about 14mm, the limit should be at or just above 100.

[z11355]

it's behaving correctly.

[Mav]

Thanks Guy's

Tom