PDA

View Full Version : ReadyHeli Hurricane SE version

Raydee
07-02-2007, 07:31 PM
So did anyone order the Pro version today? I got a email this afternoon saying that the heli was in stock and I had to buy one. Now I need to get a 401 combo and will most likey power it with a CC60 and the Century 600+ motor.
AdrianM
07-02-2007, 07:47 PM
Get a CC80 to be safe. Its not that much more $$.
Raydee
07-02-2007, 07:55 PM
Ok sounds good. I like suggestions guys ;) I want to do this heli right the first time as mush as possible.
wcc963
07-02-2007, 07:59 PM
ready heli dosnt sell the regular CC80 only the HV version, that seems like alot of ESC for this heli. it also looks like it will be alot heavier with the heatsink than the regular CC80.

any thoughts?
AdrianM
07-02-2007, 10:23 PM
Thats is true...the CC85HV is too much (heavy) for this bird. The CC60 should be fine.
Cryofix
07-03-2007, 12:09 AM
Why not a CC 45 HV? its only 1 gram heavier than the 60

CC's specs say 12S lipo max, which is a 50.4 volt max and the say 45 amps continuous, so that would mean continuous watts with max volts would be 2268 watts, that does not include bursts

so this speed controller should be able to handle it no problem.
wcc963
07-03-2007, 10:08 AM
Why not a CC 45 HV? its only 1 gram heavier than the 60

but isnt the 45 only rated for 45A?

if the motor is pulling up to 55A wouldnt it not be enough... yes it can handle very high volts, but what about amps.
wcc963
07-03-2007, 10:25 AM
here is what im doing

from Readyheli:
Gaui Hurricane 550 XES PRO SE Helicopter Combo
Futaba GY401 & S9254 Digital Servo Combo
2x FlightPower Flight Power EVO 25C 2500 mAh 3S1P 11.1v Battery
RCP Carbon Fiber Main Blades 500mm - Brand New!
Pulley Shaft with Steel Gear Gaui Hurricane 550
and new stronger gears
all this comes out to = 930.00


now from GrandRC:
Castle Creations Phoenix 80
3x Digital Hi-Speed HS6965HB
Raptor tail hub and grips
Deans Harness (serial)
all this comes out to = 412.00


so everything for about 1300
im also gonna ge the new BEC from CC, its rated for 10A
WhirlingBladesOfDeath
07-03-2007, 11:16 AM
wcc963, what motor?
wcc963
07-03-2007, 12:09 PM
wcc963, what motor?

i would like to run the... i believe its the Z30. maybe the century motor. i goota wait and see which one performs the best for my flying(hard 3D). so basically its between those two. if anyone else knows of a motor that will give gobs of power please post it.


im also goona run the raptor tail on it to so i can run the higher HS.