Newbie question

[Helodad]

Is Pitch set up mechanically or through computer? Or should I not worry about the comp mix and just set it up using pitch links and throttle poison? and wait untill I progress into 3D for computer mix/curves/etc?

[ThBrtmn]

Technically...Both...
You want to set your pitch up mechanicly before you do it in the TX. Basically to make everything linear...then you want to adjust the pitch in the radio to suit your learning or flying.

[WillJames]

Bart is right. Leave your radio to defaults. Move the collective/throttle stick to mid stick. Setup your mechanical linkage to show 0 degrees and make everything 90 degrees to each other. Then use the computer radio to limit your pitch range to somewhere around +10 to - 10 in the idleups and and normal, or some people will tell you as a noob to run your normal pitch range something more like +10 to -4 or so. Either way you want the heli to be at 0 degrees at mid stick.

This question could ahve a lot of different answers.

[Helodad]

Thanks Guys, It helps a lot to have access to a forums such as this and others.

[claysmith]

any chance you can make it to clint's next weekend? I will look over your skeedoo and get it set up and flying properly for you.

[WillJames]

Good idea Clay!! That would be the quickest way to get your heli up to speed Dad.

[Helodad]

I have talked to Bighands. I will try it depends It my wife’s birthday the week after I should probably save money. I will make one soon I will just set it up mechanical for now master nose in etc, before I worry about anything else just take it step by step. Jim

[ThBrtmn]

Helo...
What are you flying?

[Helodad]

EVO50 OSHYP MP2 FUT401/9254 JR9303/8311 woodies cool power30

[ThBrtmn]

There are a number of Evo flyers here...Claysmith,Jhodges,Raptordude,NolanManley,.. ..If you need help with it ask and they would be glad to help you.