Servo links

[Raydee]

I was looking at the servo links in the kit and 4 links are supposed to be 42mm long. Is that correct?

[bclong21]

if you are talking about the ones for the bell cranks then they are different for each make of servo. Install them per bob's vid and you won't have any problems.
just match the offset and width

[Pinecone]

Which Raptor link does Bob suggest? I don't want to watch teh videos just to find out what to order. :)

[Raydee]

Well I just looked in the manual and they say 42mm but there is no way I can get mine that short. I will wait till I get some servo horns and then see how it goes.

BTW I am having a hard time finding the LARGE jr servo wheels!

[readyheli]

guys we sell 1 ft. full threaded 2-56 rod to make up your own rods...you can get at least 4 usable inkage rods for only 1.95.

http://www.readyheli.com/Full_Threaded_Rod_2_56_12_Linkage_Rod_p/2-56foot.htm

[bclong21]

Which Raptor link does Bob suggest? I don't want to watch teh videos just to find out what to order. :)

standard length raptor not short or rocket city links.

[Finless]

If you want the Raptor links here is what to get

http://www.onlyraptors.com/new_moreinfo.php?part=TTRPV0041

TTRPV0041 is the Raptor part number.

Bob

[Pinecone]

Thanks