FUTABA G190

[roinides]

I recently have ordered this:
http://www.helikraft.com/Futaba/FUTABA/%2AG190/G190+Micro+Piezo+Gyro.html

for a friends walkera 60b mini helicopter.

It has only one plug to go to the receiver, and when we start the heli, its tail spinning too fast.

I tried reverse the rudd channel in the dx7, but nothing.It has no switch for normal or reverse on it...

Any ideas..?
thanks

[DavidH]

From the manual that comes with the G190

Gyro operation direction
7 If the rudder servo moves to the left
when the nose of the helicopter turned
to the right, the gyro direction is correct. If
the servo moves in the opposite direction,
reverse the gyro upside down.
* If you try to fl y the helicopter while the gyro
operation direction is wrong, the nose will
swing to the right or left.

Turn the gyro over on the mount. For example, the part that is stuck to the tape will become the top. Stick the tape to the other side and mount the gyro.

David

[roinides]

Thanks David, i will try it tomorow!!!

Although my problem is that the tail spinning like crazy, and not the direction, i will try it and see what happens!!!

[DavidH]

If the gyro is giving the opposite input from what is needed. The tail is going to spin like crazy.

For example if the heli nose is moving left and the gyro is wrong direction. It will add more left input to make the nose move even faster.

David