PDA

View Full Version : 13 point pitch/throttle curves


simon109
07-09-2007, 02:17 PM
Hi,

I have been trying to copy the settings from the manual of my EX-II but the manual shows the settings for the 9ZAP which has 13 point pitch/throttle curves, how do I get/make a 13 point curve in the 14MZ :dontknow

Thanks

Simon.

MarkD
07-09-2007, 02:44 PM
Move to an adjacent point with the << or >> buttons then move with the < or > buttons. You will see an outline of a square. When at the desired position select the rate button and the point will be created

DavidH
07-09-2007, 02:47 PM
I will just suggest to create a new throttle and pitch curve and not try to manually copy settings from the manual for a 9Z.
When I got my new radio I tried and set down and copy the settings from the 9Z and even with the same amount of points it was still different.

David

simon109
07-09-2007, 04:45 PM
Ok thankyou :D

Simon.

simon109
07-10-2007, 08:05 AM
Which type of curve do you use for your pitch/throttle ?

The only one I used is Linear.

If I used say Spline and set my low, mid and high is it best to delete the other points or leave them in ?

Simon.

DavidH
07-10-2007, 08:10 AM
I use the Spline curve.

David