View Full Version : electronics for a newb
hopntod
07-11-2007, 05:19 PM
I have a 600+ and a century 80/100 ESC,an align BEC and a futaba 8 ch rx.Do I understand correctly that the bec should be plugged in ch. 8?
ArthurKnowles
07-12-2007, 01:49 AM
You can plug the BEC in any unused channel or use a Y cable to p[lug it in to an existing channel.
RAV50
07-12-2007, 01:53 AM
Be sure to follow the directions that come with your ESC and remove the rd wire from the throttle channel plug when using an external RX battery or BEC. IF not you may damage the ESC.
ArthurKnowles
07-12-2007, 04:46 AM
Be sure to follow the directions that come with your ESC and remove the rd wire from the throttle channel plug when using an external RX battery or BEC. IF not you may damage the ESC.
If the ESC does not include a built-in BEC I don't think you need to do that. Based on the information provided, I didn't think his ESC included a BEC.
hopntod
07-12-2007, 05:07 AM
Thank you. In the discription of my Esc, it says "no continuous bec".