620e set up advice

[Johnda]

I'm thinking of going electric with a 620e, can any of you guys surggest a set up the would give a spots flyer 10min flight times.

Thanks

[LITHIUMSTATIC]

This is my setup for sport flying for about 10 minutes. I can hover for about 15.

Z-power Z50A-800
9-tooth pinion
PHX 85HV ESC
Koolflight BEC
401 Gyro with 9254
DX7 radio
620 V-Blades
Flightpower 10s 5000mah


:D :D :D :D :D

[Johnda]

Thanks, Whats cyclic servos are you using?

[Finless]

Well my setup is documented in my build vids but I really like the Futaba 9451's in my e620.... But Hitec 6965's or 6975's would be good and even the Futaba 9252's would be good!

Bob

[LITHIUMSTATIC]

I use 9252 on the cyclic and really like them. Check out finless build videos on this heli!!!! They will really help you during your build.

Jeremy

[Wheelhaus]

I am also using the s9451's and they're awesome. Running them at 6v allows for 127oz of torque and a transit speed of .10sec. You don't really need that much torque and speed, but it's nice and accurate. Any standard size servo will work, but a decent digital servo with a transit speed under .20 will work best.

You can be a pioneer and look into the new Futaba digital brushless servos!