14mz and multigov

[wargor]

Hi all,

I recently setup the multigov in my helicopter. I got everything setup with throttle in slot 1 and the RPM in slot 7 (governor channel)I tied everything into switch E which is my norm, idle1, and Idle2. I get the different RPM reading on the LCD as I should. Here is what I want to do.

I had a futaba gov before and I was able to turn the gov off by another channel. Is there a way to do it with the Multigov? If so can anyone tell me how. Thanks

[flyinfool]

The short answer is no.

The multi gov is not as friendly as some of the other govs when it comes to selecting a speed.
With the multi gov there are only 3 possible speed settings of which you can use one of them as gov off. You can not change the head speed from the TX other than to select one of the 3 preset speeds.

[SteveL]

The easy answer is to assign CH 7 switch E and then disable to GOV Menu in the radio. I use the GOV menu for the rest of my Govs but it is not necessary with the multigov