TREX 450 S Carbon Updated for items sold and reduced prices

[johnckendall]

SOLD

Everything below (including parts) for a package price of $220


TRex 450S CF Silver
Align 430L (3550 KV) Motor
Align 35AG ESC 6v BEC
3 DS285 servos
Align Metal Main Rotor Holder (Gray)
Align Metal Control Levers (Gray)
450 Heavy Duty Landing Skids (Metallic Gray)


Spare Parts

Linkage Rod Set
Metal Tail Boom (1 pcs) (347mm)
Main Shaft (2 pcs)
Feathering Shaft Spindle
misc parts bag


PM or Email johnckendall@gmail.com with requests.

The heli and all components are less than 1 month old with less than 10 flights on them. This heli was meticulously built according to the finless et al info and videos. It flies beautifully. Includes 1 set of slightly dinged woodies balanced and ready to go

Only damage is some slight cuts on the tail fin and a chip off one of the screw mounts for the landing gear.


Parted Out prices:

Built heli with upgrades installed $161
. Add Align 430l motor: $34
. Add Align rcebl35gx ESC: $40
. Add 3 digital DS285 servos: $70 ( or $25 each )

Tools ($35 for them all)
. Align Pitch Gage
. Deluxe Ball Link Pliers
. hex drivers
. small and large phillips

[Bruce H]

PM sent on the DX-7

[johnckendall]

Reduced prices. $840 and you are ready to fly. This is over $350 cheaper than retail for a like-new setup (less than a month old).

[Bruce H]

Payment sent for the DX-7.

Thanks,
Bruce

[johnckendall]

Payment confirmed. Dx7 tx sold.

[johnckendall]

15c battery is sold

[johnckendall]

These items are SOLD pending funds:
2 20c batteries
1 15c battery
1 Dx7 Transmitter
1 set pro blades (used, but good condition)
1 set carbon blades (never flown)
1 package 220mm flybars (2 new in package)
1 blade balancer
1 belt (new in package)
1 swash leveler

Reduced prices on remaining items.

[johnckendall]

did they happen to tell you if it would be here today or friday

USPS says 2 days to zip 78758 from my location. So it should be tomorrow.

txfly,
This new site apparently has limits on the total number of messages, and it is quite low at 50. So I guess we'll have to use the thread to communicate instead.

[RogerThat1]

PM posten on some tools.
:D

[txflyer]

kool man thanks for the fast shipping and i will be paypaling you the payment for 85% of what is listed as pending funds a few post above. should be first thing in the mourning... just to double check that everything smooth i wanted the

pro woodie
carbon blades
balancer
swash leveler
belt
flybar's

i think that was all...

[johnckendall]

The 2 20c batteries are now sold.

txflyer,
yes, I have you down for:
1 set pro blades (used, but good condition)

1 set carbon blades (never flown)

1 package 220mm flybars (2 new in package)

1 blade balancer

1 belt (new in package)

1 swash leveler

I'll ship as soon as the funds hit my inbox.

Thanks,
jck

[johnckendall]

The items in the previous post are now officially SOLD.

[johnckendall]

The ball link sizing tool is SOLD pending shipping issues.

[johnckendall]

txflyer,
You should get your stuff Monday or Tuesday.

Thanks!
jck

[txflyer]

thanks man

guys this guy is a great guy to do business with. gets it out the door and on the way to you very quickly. packaging is top notch. my lipo came wrapping in bubble wrap and then the box was stuffed with news paper...

hey man just wondering tho do you have any tail rotor shafts ? my lhs is always out of stock.. i think i need a new tho.. ive got a slight vibration in the tail and i cannot figure out what it is.

[johnckendall]

Thanks for the nice words. :)

Yeah, I have an extra tail rotor shaft. I'll send it with the balancer tomorrow.

Also, make sure your belt isn't too tight.

Later,
jck

[Spectre]

Everything sold?

[johnckendall]

No! Everything listed the first post is still available. But the 401 and 9650 are possibly sold pending a reply and payment.

Thanks,
jck

[johnckendall]

The 401 and 9650 are now SOLD

Thanks

[johnckendall]

Updated prices

[johnckendall]

The AR6100 is now SOLD

[johnckendall]

Everything but the tools is SOLD pending funds.

[RogerThat1]

Hi John.

Thanks again for the promt and fast transaction with monet tool You sent me a year ago.
Pleasure doing business with You, and You have my best recomendations!!!
Do You have anything left of the tools?