baliset
07-31-2007, 07:56 PM
Looking for reasonable offer for the whole package:
I have mostly built, but never flew this system. It turns out I don't have the time to pursue this hobby and prefer to get some money back. I have been building according to Finless Bob's instructions. The servos are mounted, the head is put together, I have even done the subtrims. I did cut some slack on the gyro wires (they were way too long), and I also cut, but did not yet splice the cables that come with the FS8 Copilot. The motor is mounted, all the leads, connectors are soldered.
I will post a more thorough listing, but I have at least the following:
+ Trex 450 deluxe V2 (Silver) kit, with several spare parts (I am missing the pushrod for the tail servo at moment, since I broke the kit version)
+ Futaba 7CHP radio, with added trickle charger
+ 9650 Tail servo
+ 3 HS 56 servos
+ plexiglass mounted GY401 (mounted per Finless Bob's recommendations)
+ Fmadirect FS8CPI
( FS8 Co Pilot Integrated 8 Channel Receiver/Co Pilot with Co Pilot Viewer Software, with vertical sensor and USB programming kit)
+ Castle Creations Phoenix-35 Speed Control Brushless
(that makes a total of two speed controllers, including one that comes with kit)
+ PowerQuest battery
+ Fmadirect CellPro 4s charger, with appropriate adapter
+ receiver battery I use for servo testing
+ RealFlight G3.5 flight simulator
Lots of the best tools, (screwdrivers, balancer, ball link pliers, special swashplate leveler, etc.)
More stuff I cannot remember.
Will post pictures if there is any interest
I have mostly built, but never flew this system. It turns out I don't have the time to pursue this hobby and prefer to get some money back. I have been building according to Finless Bob's instructions. The servos are mounted, the head is put together, I have even done the subtrims. I did cut some slack on the gyro wires (they were way too long), and I also cut, but did not yet splice the cables that come with the FS8 Copilot. The motor is mounted, all the leads, connectors are soldered.
I will post a more thorough listing, but I have at least the following:
+ Trex 450 deluxe V2 (Silver) kit, with several spare parts (I am missing the pushrod for the tail servo at moment, since I broke the kit version)
+ Futaba 7CHP radio, with added trickle charger
+ 9650 Tail servo
+ 3 HS 56 servos
+ plexiglass mounted GY401 (mounted per Finless Bob's recommendations)
+ Fmadirect FS8CPI
( FS8 Co Pilot Integrated 8 Channel Receiver/Co Pilot with Co Pilot Viewer Software, with vertical sensor and USB programming kit)
+ Castle Creations Phoenix-35 Speed Control Brushless
(that makes a total of two speed controllers, including one that comes with kit)
+ PowerQuest battery
+ Fmadirect CellPro 4s charger, with appropriate adapter
+ receiver battery I use for servo testing
+ RealFlight G3.5 flight simulator
Lots of the best tools, (screwdrivers, balancer, ball link pliers, special swashplate leveler, etc.)
More stuff I cannot remember.
Will post pictures if there is any interest