PDA

View Full Version : Help with YGE 7s Progcard


opps
05-29-2012, 04:40 PM
I have no idea to connect YGE 7s with Procard because it's no any instruction over the internet for the 3pins connector from the ESC.. :arggg:

Anyone help ? :noteworthy

helidude71
05-29-2012, 05:18 PM
I have no clue, but why not try it?
If you put the red wire on the middle pin I guess no harm can be done.

dpelletier
05-29-2012, 06:38 PM
3 pin connector of the ESC to the left 3 pin connector of the ProgCard.
Negative (black or brown) to the right most pin, probably the same on the ESC

ProgCard right 3 pin connector to the Throttle channel of the Receiver (Rx)

opps
05-29-2012, 10:54 PM
I think i messed up :arggg: i know the Progcard side but not YGE 7s because it's selling "Light Weight" and it's no any cable on it. The ESC coming without any instruction for the which soldering point is for the programming. :face Anyone know ?

desertstalker
05-29-2012, 11:34 PM
You program it with the throttle lead, as to order, just try both, power is in the middle so you wont hurt anything if you get it backwards (it just wont work).

opps
05-30-2012, 06:34 AM
You program it with the throttle lead, as to order, just try both, power is in the middle so you wont hurt anything if you get it backwards (it just wont work).

i can use the TX for program just wonder how can i program it with the Progcard because YGE 7s without any cable or plug come with....:DOH

desertstalker
05-30-2012, 09:44 PM
i can use the TX for program just wonder how can i program it with the Progcard because YGE 7s without any cable or plug come with....:DOH

Take the same lead you use to plug it into the RX and plug into the prog-card...

opps
05-31-2012, 12:28 PM
Take the same lead you use to plug it into the RX and plug into the prog-card...

Thanks !!! I think i got your meaning and i just draft a diagram attached, is it like that ?:oops:

dpelletier
05-31-2012, 01:00 PM
That ought to do it.

maarset
06-06-2012, 06:42 PM
Let us know how this works on your MCPx. Very cool