T-Rex 600 ULTIMATE COMBO

[EdgeCrusher]

2,300 TAKES IT ALL!!!


Hey guys. i have up for sale the best combo deal on a T-600 you will ever find. I would never have thought i would be selling my 600 but an unexpected pregnancy can do that to you :(.

I purchased this as the 600CF ($550) combo and have added the following

Newer Align 600XL motor $116.99
Castle Creations HV-85 Controller With Data Link connector $200.00
Helical Cut main gear with 10T 11T 12T 13T Pinions $30.00
Metal Blade Grips $51.00
V85 Carbon Paddles $30.00
2 New sets YB92MM tail blades $60.00
SAB 600MM blades good shape (Currently Installed) $75.00
NEW IN BOX Radix YB600's $89.00
NEW IN BOX NEVER INSTALLED Torque Tube upgrade $110.00
RECENTLY INSTALLED GY611 w/9256 $370.00
Backup GY401 with 9254 (Wires were cut to length for install) $210.00
3 9256's For Cyclic/Collective $225.00
Futaba R149DP receiver $160
3!!! Flight power Evo 20 New Formulation 4900 batteries $900
2!!! Thunder Power Extreme 5000's $600
1 Thunder power Prolite 3200 2S Receiver pack $50.00
New painted Canopy (Looks very nice) $65.00
TP1010 Charger with TP210 Balancer $300.00
Hobbico 12 Volt Power Supply w/5 Volt Tap $90.00
Tons of Extras Including NEW in box Rotorworkz Frames $???

OPINTIONAL Futaba 9CHPS Heli Radio (TX) only with NOBS 2700MAH Battery $400.00

If you have any questions or concerns feel free to PM or Call my Cell Phone @ 651-308-0774.
Local Pickup is offered if your local to 54023 (WI) or feel like taking a drive.


Thanks for looking.

[Bruce H]

PM sent

[tvagain2]

Hey guys. i have up for sale the best combo deal on a T-600 you will ever find. I would never have thought i would be selling my 600 but an unexpected pregnancy can do that to you :(.

I purchased this as the 600CF ($550) combo and have added the following

Newer Align 600XL motor $116.99
Castle Creations HV-85 Controller With Data Link connector $200.00
Helical Cut main gear with 10T 11T 12T 13T Pinions $30.00
Metal Blade Grips $51.00
V85 Carbon Paddles $30.00
2 New sets YB92MM tail blades $60.00
SAB 600MM blades good shape (Currently Installed) $75.00
NEW IN BOX Radix YB600's $89.00
NEW IN BOX NEVER INSTALLED Torque Tube upgrade $110.00
RECENTLY INSTALLED GY611 w/9256 $370.00
Backup GY401 with 9254 (Wires were cut to length for install) $210.00
3 9256's For Cyclic/Collective $225.00
Futaba R149DP receiver $160
3!!! Flight power Evo 20 New Formulation 4900 batteries $900
2!!! Thunder Power Extreme 5000's $600
1 Thunder power Prolite 3200 2S Receiver pack $50.00
New painted Canopy (Looks very nice) $65.00
TP1010 Charger with TP210 Balancer $300.00
Hobbico 12 Volt Power Supply w/5 Volt Tap $90.00
Tons of Extras Including NEW in box Rotorworkz Frames $???

OPINTIONAL Futaba 9CHPS Heli Radio (TX) only with NOBS 2700MAH Battery $400.00

If you have any questions or concerns feel free to PM or Call my Cell Phone @ 651-308-0774.
Local Pickup is offered if your local to 54023 (WI) or feel like taking a drive.


Thanks for looking.
What is your rock bottom price for everything but the transmitter and 401 gyro and servo. I'm definalely interested. Also, how much to ship to Boise Idaho, 83616?

Thank you!

Scott

[EdgeCrusher]

Hey Scott, i will be out for most of the day today. Butt i will get back to you ASAP on prices


Thanks

[tvagain2]

Okay!

[bstock]

Edgecrusher... I had PMed you last night asking how much with-out the TX & RX. When you get a chance... could you read it over and also get back to me.

Thanks - Brent

[EdgeCrusher]

Thanks guys for all your interest. Sundays are very busy for me so i will get back to everyone with Full details tomorrow.

[joesurf1]

What is the asking price raido and all. Joesurf1

[volcomsnows2k]

pm sent

[b_hendrickson]

What is the asking price without the radio?

[ClayK]

Asking price should be listed, hopefully just an oversight.

[Djcarr]

Interested as well. Looking for price info. Thanks

[BobbyL]

is she sold ,or do ya still have her for sale,,,, how much,,

[HoverOver]

Hi EdgeCrusher... Just left you a voice message. I'm with the guy above. I don't see your asking price... I'm interested in the whole thing minus the Tx/Rx. BTW Congrats on the pregnancy. Boy is your life about to change!

[EdgeCrusher]

hey guys im sorry for no replys, I've been super busy and on top of that had some Internet issues. The package is still available and if your still interested please send me a PM and i will get back to you will all the info you need


Thanks

[bstock]

edgecrusher,

On Aug 8th - I PMed you:

Edgecrusher... I had PMed you last night asking how much with-out the TX & RX. When you get a chance... could you read it over and also get back to me.

Thanks - Brent

I am still interested in hearing from you on this.

Thanks - Brent

[bstock]

I have sent 2 PMs & made 2 posts over 30 days... and still no reply or price. I am no longer interested.

Something smells fishy here. Even after an Admin asked for a price to be listed... it was not included..

[EdgeCrusher]

Check front page for new price.


BTW i responded to ever PM i received after i had asked for people to contact me again. I mentioned i had i lost my Internet for some time. Nothing fishy here guys feel free to call my on my cell phone