Shogun (stock setup) Hitec Eclipse 7 Pitch and throttle curv

[TGoodwin]

Hello,

I am having trouble setting up my pitch and throttle curves on my new Shogun. I set the blade pitch to -7, 0, +7 as described in the manual. I then set the throttle hold to 0%. Set the throttle curve for normal to 0, 25, 50, 75, 100. I then set the pitch curve for normal at 0, 25, 50, 75, 100.

Does this sound corect? I can not find my Eclipse 7 manual.

Thanks Ted

[TGoodwin]

I think I got the curves sorted out.....

does anyone know if the Eclipse has a throttle problem...software glitch in the hover mode? :arggg:

Thanks Ted

[Zeus]

I have a JR 6201 for my shogun, and as you hover it the tail oscilates up and down a lot. Also I get glitches, I really dont know what it is . As I start to fly it more aggressive it seems like the motor turns off for a milisecond and then back on. Whta could it be? Radio setup?

[slow]

I'm using an Eclipse for all my birds, and I havent noticed any problems with the throttle on it.

Also flying a shogun with it, but I'm using a brushless and a CC ESC. I'm running the ESC in governor mode, and my curves are about the same as yours in normal mode, but I'm running +-9 degs.
For Idle-up1, I'm using a flat 70% curve, and Idle-up2 is a flat 90%

/James