Superdave 420
08-06-2007, 03:53 PM
Or Will also Trade for a Trex 600 setup
X-cell .60 #1001 lots of Carbon Fiber and alloy. pretty much converted into an optimised masterpiece
It is an excellent flying machine, which is a hot rod in the air, fully aerobatic as is. It has many SE upgrades as you can see from the pics.
This is still one of the highest quallity helicopter kits still to date,
if your local you can come buy and check it out.
Custom painted canopy and matching horizontal fin
...and much more as you can see in the pictures
The following are included as shown in the pictures:
(1) #0867 series "99" torque tube tail drive kit
(1) #0586-0 carbon graphite frame set
(1) #0555 ball bearing anti-rotation bracket kit
(1) #0832 heavy duty front t/rotor transmission tune up kit
(1) Futaba S148 servo (throttle)
(3) Futaba S9202 servos
(1) HITEC RX HFD 08 RD * channel new
(1) YS .61 ST-H pump engine
(1) S9250 Tail servo (not shown)
(1) GY401 Gyro (not shown)
(1) Throttle Jockey Govenor w/ optical sensor (not shown) ( NIB)
(1) #0535 servo tray brace
(1) #0596 adjustable roll servo control arm
(1) Original Full size Manual Plots
(1) extra new clutch
(1) Spare set of Carbon side frames with black anodized CNC stiffeners
there is a bunch of additional parts as well.
I can even throw in a torque master 90 starter and nicad igniter
This bird is Flawless. I am selling becauese I need to thin my nitro fleet.
Shipping anywhere in the US FREE
David Cook
I did not realise how long it took load all the pics,
here is a link to all the pictures
http://s94.photobucket.com/albums/l94/superdave420/X-Cell%2060/
X-cell .60 #1001 lots of Carbon Fiber and alloy. pretty much converted into an optimised masterpiece
It is an excellent flying machine, which is a hot rod in the air, fully aerobatic as is. It has many SE upgrades as you can see from the pics.
This is still one of the highest quallity helicopter kits still to date,
if your local you can come buy and check it out.
Custom painted canopy and matching horizontal fin
...and much more as you can see in the pictures
The following are included as shown in the pictures:
(1) #0867 series "99" torque tube tail drive kit
(1) #0586-0 carbon graphite frame set
(1) #0555 ball bearing anti-rotation bracket kit
(1) #0832 heavy duty front t/rotor transmission tune up kit
(1) Futaba S148 servo (throttle)
(3) Futaba S9202 servos
(1) HITEC RX HFD 08 RD * channel new
(1) YS .61 ST-H pump engine
(1) S9250 Tail servo (not shown)
(1) GY401 Gyro (not shown)
(1) Throttle Jockey Govenor w/ optical sensor (not shown) ( NIB)
(1) #0535 servo tray brace
(1) #0596 adjustable roll servo control arm
(1) Original Full size Manual Plots
(1) extra new clutch
(1) Spare set of Carbon side frames with black anodized CNC stiffeners
there is a bunch of additional parts as well.
I can even throw in a torque master 90 starter and nicad igniter
This bird is Flawless. I am selling becauese I need to thin my nitro fleet.
Shipping anywhere in the US FREE
David Cook
I did not realise how long it took load all the pics,
here is a link to all the pictures
http://s94.photobucket.com/albums/l94/superdave420/X-Cell%2060/