PDA

View Full Version : anyone have an idea what happened


AKPhill
06-09-2012, 11:59 AM
KK board

Well had trouble with my esc's so I ordered new ones and hooked them up.
Was setting tx throttle ranges and the board just quit
no throttle response, can't arm the board motors just beep at me
lowered my trim setting on throttle still no go.
hooked each esc and motor by themselves and set tx throttle and all motors work but nothing when hooked to the board

The board came flashed for x quad and is what I am setting up for

Maybe someone has an idea hope so
If you need more info please ask as I am new to these quads

petedee
06-09-2012, 03:04 PM
Try re-flashing the board.

AKPhill
06-09-2012, 04:09 PM
Been trying to that very thing

Trying to download the usbasp drivers
Can get them to run in windows 7 64 bit but cannot get the flash tool to run in widows 7
Can get flash tool to run in xp 32 bit but cannot get usbasp to run in xp
Tried it in 32 bit and 64 bit operating systems not having much luck

petedee
06-10-2012, 08:12 PM
For Win7 64bit if you have loaded Java using a 32 bit browser the KK tool will not run, you must use a 64 bit browser like Internet Explorer 64 bit to load 64 bit Java, this held me up for a while. What version of KK tool are you trying to run, if it is one of the newer ones try going back to version 0.53.

There is a couple of the 32 bit driver versions around, try another one making sure you completely uninstall the old one first.

Good luck.

Pete