Mini Titan E325 with Futaba 6EXHP TX Setting up...

[cybernero]

Hello there,

I'm setting up my Mini Titan thesedays.

But getting so much trouble with eCCPM setting, especially leveling. :roll:
It's so hard to level swash plate with my Futaba 6EXHP.

Unfortunately, 6EXHP transmitter even has no sub-trim! :mad:
(I think TX's 'Trim' function means Sub-Trim, but It is not!)

Spending plenty of time, setup the mixing anyway...

When I move the pitch lever up&down, swash plate move down&up properly.
But there is some wrigglling. I don't know why...

I want to know what should I do to get rid of this my bothering stuff...

And I need your help and some tip/tech for the setting up E325
with Futaba 6EXHP.

Thanks.

[Fade-Dude]

Mine works fine.
The "trims" frunction works just fine. Just like sub trims.

Right servo into aileron channel, rear servo into elevator channel, left servo, aux channel(6).

Mixing

swash type = 3-S
A = -100
E = -90
P = +70

That should work

[cybernero]

Wow, fade-dude, thanks for your set-up data. :lol:
I'll reference your mixing data. Thanks a lot.

But there is something strange.

When I adjust the aileron trim, both servos of channel 1 and channel 6
move simultaneously. Is it a right situation?

[Fade-Dude]

oh, you want to mvoe each channel on its own, with sub trims?
That might not be possible then... only when you select a different swash plate type.

I centered my servos manually and all is 100% fine.
Also I have 100% smooth action on my mixing, not like yours in your youtube video.
Are you using the sme servo's for all three servo's?

I have Hitec HS65's

[cybernero]

Yes, Fade.
I'm using the three same Maxwell MX56BB servos for CCPM mix.

Because of there is no sub-trim function with 6EXH,
I can not move each servo separately. It makes me crazy...

How did you make the servo arms level manually?
I tried to level by changing servo arm's position one by one, but it couldn't.

Thanks for your concern:wink:

[Fade-Dude]

i just put on all the horns at the same place on each servo. made the two side links the same length, and adjusted the rear link to match....