RC setup with YGE 160 HV Exxtreme

[lior_bar_ami]

Hi all,
I'm trying to setup my YGE 160HV Exxtreme on my heli using standard RX (w/o Vbar), I currently don't have any YGE's prog card, so I'm trying to setup the ESC with the RC setup instructions as described here:
http://elektrorc.com/userfiles/media/RC-Setup_english.pdf

On the basis menu, the controller acts a bit different than what it described on the pdf - when lowering the stick to idle (after teaching the full range), I get different type of tunes than the two described above.

Also when I'm trying to enter to advanced mode setup - the ESC get stuck with the continues tunes (with the throttle stick at full pos), and won't enter to that menu...

Am I doing something wrong? can the Exxtreme edition be setuped without the ProgCard or I have to use it?
Is there any way of using Kontronik's ProgCard with the YGE?

Would appreciate your help...
Thanks,
Lior

[lior_bar_ami]

Anyone?

[Madryan]

You can buy one from hobbyking for about 5 bucks they work , best u use a prog card, :-)

Sent from my BlackBerry 9700 using Tapatalk

[Jays200]

G'day Lior,

See my thread about a different firmware version on our Xxtreme YGE ESC's. It seems they can't be put in to Gov Store mode like an earlier version, non Xxtreme YGE 160HV.

Regards,

Jayson

[lior_bar_ami]

Many thanks guys :)