View Full Version : How is Z-Power Motor 1150kV ?
csell
08-09-2007, 04:51 AM
Hello.
I am searching for more information for the Z-Power Motor 1150kV, Is there any that can help me?
In the T-rex 600e forum are a thread looking for a replacement for a broken Align 600XL.
The LOGO 500 3D's Z-Power Motor 1150kV is suggested, but what to compare it to?
Is it similar in performance to a ZPower Z30 or may be Z50 or what can you tell us?
Any information is welcome.
Regards Carsten
OICU812
08-09-2007, 04:00 PM
Pretty darn sure all that Mikado motor is, is a relabeled Z30A-1100 motor.
stevehonn
08-09-2007, 04:59 PM
I'm using the Thunder Tiger motor for the E550 which is a Z30-1100, Z power provide various manufacturers with versions of this motor, the Century 600+ is another so if Mikado are listing a Z power motor I'd agree its likely a Z30-1100. The quoted kv's seem to vary a little as the TT motor is quoted as 1050kv so I'd think there's little significance that the Mikado motor is rated 1150kv.
Whichever it happens to be it's a popular motor that gives very good performance, especially at the price.
I'm using the Z30-1110 in a Logo 10 with 4s3p and 23 T and 515mm blades as an upgrade from the Hacker A30-8XL. The Z motor runs warm but not hot and has plenty of power and speed for sport flying. I have the packs and pinions to try 5s but having too much fun the way it is.
stevehonn
09-03-2007, 04:04 PM
The Z-Power Mikado are selling looks to be a Z50, not a Z30 and with 1150kv it should be well suited to 6S setups, there are a few Trex 600 pilots looking at it as a replacement for the Align 600L/XL motors.
rick.007
09-26-2007, 03:45 PM
What is the Mikado part number for this motor?
Motions
09-26-2007, 03:51 PM
Part# 5000 or in some cases MIK5000.
just to let you all know, this motor was specifically designed for the L500 for Mikado by Z-Power, thats why you cannot find any info on it on the internet
Raydee
09-26-2007, 06:58 PM
I wonder if the Z50 will decrease run time a lot over the Z30?
Daniel Jetschin
09-27-2007, 03:38 AM
Hey
It's a true Z50 motor, and without wasting words, it's a beast!:noteworthy And gets barely warm.
Recommended!
Dan
bladebreaker
09-30-2007, 01:37 AM
Does this motor work well with the Jazz 40-6-18 ESC on 5s?
OICU812
09-30-2007, 02:01 AM
I really doubt it, it was designed around 6S power.