Throttle jockey to flight mode switch

[nosler130]

Hi can some one please help,

I am using a JR 9X2 tranny and am trying to get my throttle jockey to come on with my idle 1 and 2 settings (aux 4) ????

Just changing the device selection from aux 2 to aux 4 turns TJ on in normal, off in idle 1 , and on again in idle2???

I want TJ off in normal, 1st speed in idle 1, 2nd speed in idle 2?????

It is on a Trex 600n, hyper 50

Can this be done?????

Cheers JJ

[du hast]

try this www.modelavionics.com/Jockey/RadioTips/JR_9303.htm

[nosler130]

Thanks du hast,

but i have my gyro through the gear channel???

JJ

[geir]

hi.
You need to plug your gyro in ch.aux2 and your tj to gear channel.
In device select set: -gear/gear sw/act
-aux/fmod sw/gyr


You then need to calibrate your tj to your throttle.When thats done,return to device select,and set gear-out to gov.
Then you set your gyro settings in the gyro sense menu and your tj settings in your govenor menu
I have norm: 0%
st-1: 92%
st-2: 97%
hold: 0%
for my raptor 50 w/hyper 50

hope this helps.....

gm