eyeflyhelis
08-13-2007, 12:02 AM
Clean up the garage/ shop and found some things to sell:
Futaba GV-1 controller with mount and magnet- no box or instructions $90 shipped
Medusa motor MR-036-050-1600-5 NIB $ 100 shipped
Castle Creations Phoenix HV85 NIB $180 shipped
JR x-347 radio good for parts, does not work, a few broken switches - $15 shipped
CSM ICG 540 gyro, not sure if it works, plugged in and it lights up, found it buried in my box- I swapped it out for a 401 gyro over 1 year ago - it worked then- $20 shipped
Dynamite Vision Peak Ultra AC/DC charger - DYN4053, used about 15 times good for 1-8 cell Ni-cad & NIMH or 1-3 cell Lipo- I run 3- 6 cell so I cant use it make a serious offer -was $105 new- or I would trade for a TP 1010 or the Chinese knock off version
$80 shipped
550mm blades 3 sets not sure of brand – haven’t had a 30 in over a year don’t even remember where these came from
Fiberglass
-like new set $30 shipped
-beat up set $10 shipped
Wood blades look ok $10 shipped
Thunder Tiger high performance Carbon Graphite Blades 680mm ( I think- I measure 27 1/8” from tip to back side of blade – behind hole see pic) , like new, I don’t think I ever flew them, would trade for a good set of 600mm blades (v2 or sabs preferred) $70
30 size tuned pipe used has fuel stains - $30 shipped
Protech charger – old school NI-Cad but can be used with NIMH still in box & looking great. used it for my 7.2v cars $20 shipped
Jr G500T gyro used but working good when removed, no instruction (can be downloaded). $100 shipped
Dragon canopy custom painted X-cell canopy, its plastic but has some fiberglass reinforcement on the seem, sold heli before it was finished & never got another x-cell. It came with my 46 but I think it would fit a 30 size ship with no problem. Looks like it might work on a t-rex also. $75 shipped
Small lot of Raptor parts, plastic head, belt (50 I believe), new paddles, 2 arms + what ever else I find between now and when it sells $15 shipped
GP 61 plank motor, been sitting for about 2 years but loaded with oil, I seem to remember it being in need the needle valve or the gasket but this engine has had little use & looks like new still. Great compression comes with muffler $40 shipped
JZ zinger plank props used
18x6
16x6
16x8
+1 master airscrew 14x8 $30 shipped for all of them.
24” snow aluminum skis for a plank or could be made to fit a heli. One has a little bend upwards in it on the right side a bout ¾ the wayt to the front (hard to see in pics) $20 shipped
Pics to follow
I would consider 600mm carbon blades or an OS hyper 50 for trade possibilities
Futaba GV-1 controller with mount and magnet- no box or instructions $90 shipped
Medusa motor MR-036-050-1600-5 NIB $ 100 shipped
Castle Creations Phoenix HV85 NIB $180 shipped
JR x-347 radio good for parts, does not work, a few broken switches - $15 shipped
CSM ICG 540 gyro, not sure if it works, plugged in and it lights up, found it buried in my box- I swapped it out for a 401 gyro over 1 year ago - it worked then- $20 shipped
Dynamite Vision Peak Ultra AC/DC charger - DYN4053, used about 15 times good for 1-8 cell Ni-cad & NIMH or 1-3 cell Lipo- I run 3- 6 cell so I cant use it make a serious offer -was $105 new- or I would trade for a TP 1010 or the Chinese knock off version
$80 shipped
550mm blades 3 sets not sure of brand – haven’t had a 30 in over a year don’t even remember where these came from
Fiberglass
-like new set $30 shipped
-beat up set $10 shipped
Wood blades look ok $10 shipped
Thunder Tiger high performance Carbon Graphite Blades 680mm ( I think- I measure 27 1/8” from tip to back side of blade – behind hole see pic) , like new, I don’t think I ever flew them, would trade for a good set of 600mm blades (v2 or sabs preferred) $70
30 size tuned pipe used has fuel stains - $30 shipped
Protech charger – old school NI-Cad but can be used with NIMH still in box & looking great. used it for my 7.2v cars $20 shipped
Jr G500T gyro used but working good when removed, no instruction (can be downloaded). $100 shipped
Dragon canopy custom painted X-cell canopy, its plastic but has some fiberglass reinforcement on the seem, sold heli before it was finished & never got another x-cell. It came with my 46 but I think it would fit a 30 size ship with no problem. Looks like it might work on a t-rex also. $75 shipped
Small lot of Raptor parts, plastic head, belt (50 I believe), new paddles, 2 arms + what ever else I find between now and when it sells $15 shipped
GP 61 plank motor, been sitting for about 2 years but loaded with oil, I seem to remember it being in need the needle valve or the gasket but this engine has had little use & looks like new still. Great compression comes with muffler $40 shipped
JZ zinger plank props used
18x6
16x6
16x8
+1 master airscrew 14x8 $30 shipped for all of them.
24” snow aluminum skis for a plank or could be made to fit a heli. One has a little bend upwards in it on the right side a bout ¾ the wayt to the front (hard to see in pics) $20 shipped
Pics to follow
I would consider 600mm carbon blades or an OS hyper 50 for trade possibilities