View Full Version : envert heli
Can you envert the heli on the phoenix i cant have JR652 +11-11 pitch ideal up tryed everthing can do on my trex 450 thanks for help
jrohland
08-20-2007, 08:06 AM
Can you envert[sic] the heli on the phoenix i cant have JR652 +11-11 pitch ideal up tryed everthing can do on my trex 450 thanks for helpYes you can invert your heli in Phoenix. Make sure your engine and collective pitch are on seperate channels. Your throttle channel needs to have a flat (if you use governor mode) or V shapped curve in your JR652.
It might help if you look at this (http://www.helifreak.com/showthread.php?t=34568) thread. Be sure to open the attached print screen. The thread talks about Spektrum but, JR and Spektrum are very similar.
jrohland
antennahead
08-20-2007, 07:48 PM
Hey Tom, I responded to your last post a couple of days ago but it seems to have disapeared :arggg: anyway, from what I remembered you could get your futaba to work but not your JR? I am going to assume you have downloaded the latest version 104?? if you haven't do this first as it makes calibration much easier. If you have the current version, I think you may have the wrong tx profile selected for the JR,hence the reason why your futaba works fine. go to the drop down menu at the top, select system, then select your controls, then select the JR tx profile that is closest to your tx. Hope this helps.:lol:
antennahead
08-20-2007, 07:57 PM
Tom, one other thing,Phoenix does the ccpm mixing for you, so make sure this is off in your TX. select a 1s setting instead of 3s this turns off the tx mixing (I don't know if the 1s or 3s is universal or just futaba terms.......all I know is futaba)
thanks i will try it the G2 is easy i got a new PC vista do not like the G2 will not work on vista thanks for everthing