View Full Version : Logo 500 3D Servo's
mark95f
08-20-2007, 09:19 PM
What type servo's are people using for the new Logo 500 3D.
Sport flying and some mild 3D
loopzilla
08-20-2007, 10:07 PM
We use either Futaba 9252, 9451, or the new JR 8717's. You can also use midi sized servos to loose some weight, utilizing the servo adapter plates made by Rotorworkz. Then Futaba 9650 or JR 3421MGs will fit.
Our best luck so far has been with the 9451s, but we are just now testing the JR 8717s on 8V.
i fly hard 3D, but i had some spektrum standard digis from when i got my spektrum and they work perfectly with a flybar
Skaross
08-21-2007, 05:23 AM
Using the Custom Heli Parts 9650 adaptor plates in mine, with 9650's of course :)
These plates are designed for 9650 use in the Hurricane 550 and sold by ReadyHeli. The mounting holes don't match to the pre-drilled ones in the Logo but there is plenty of meat in the chassis to drill 4 new pilot holes in line with those in the carbon. A drop of cyno to anchor them to the frame and the 4 self tappers (provided) work a treat.
They give the left and right cyclic servos almost perfect alignment to the swash - the elevator servo is not quite as good but it would be hard to rejig for better alignment.
Kev
only thing is, anf i found this with my Logo 14, the 9650s just dont have the power in hard 3D, especially with a V-bar