View Full Version : The Official SCHC thread
Finless
12-17-2007, 01:24 AM
Hey..... OK which one of you did this....
I just went to the Youtube link posted by Jason here
http://www.youtube.com/watch?v=uU6tpB-Ambo
And I see a comment posted by Finless and I cant tell you for FACT that is not me! I don't even have a youtube account.... So which one of you is screwing with me? I am NOT very happy with this so you know :(
DAMN!
Bob
brovic777
12-17-2007, 01:28 AM
Hey..... OK which one of you did this....
I just went to the Youtube link posted by Jason here
http://www.youtube.com/watch?v=uU6tpB-Ambo
And I see a comment posted by Finless and I cant tell you for FACT that is not me! I don't even have a youtube account.... So which one of you is screwing with me? I am NOT very happy with this so you know :(
DAMN!
Bob
Wouldn't be surprised if its one our friends on RCG's that got our thread closed there.
Jason Chow
12-17-2007, 01:32 AM
bob, i just saw that comment made and im not sure who posted that comment, but i deleted that video for now. videos may be posted later.
Finless
12-17-2007, 02:18 AM
Ummm OK thanks... but I DO have to ask why people are screwing with you guys?
Thats pretty weird man....
I hope any RCG stuff goes away long term so you guys can all be happy here....
One last question... Why was your SCHC thread closed on RCG? Be honest...
Bob
Finless
12-17-2007, 02:23 AM
FYI Jason as we talked about on the phone... I will host them here on HF you just need to let me know when you can upload them to my FTP server so I can transfer them to the HF server.... Or as you said lety me download them from your FTP server.
This way they arent on Youtube and cant get attacked by loosers like that!
But I still want to know what baggage you all might have carried over here with you all from RCG or where ever... It's best that I know the story so I can help if people come here to BE BAD. PM me and let me know please.
Bob
brovic777
12-17-2007, 07:15 AM
Got tied up making the Trex 500 Video guys.
Long Nguyen
12-17-2007, 07:56 AM
I'm waiting for the vids Victor. Thank you very much for the good job!
I had some lockouts on Spectrum. Actually, I can make it lock out every time I want. On my Synergy N9, I just have to move the sticks continuously for 30 seconds on a 2 time flown 2-cell 2100mah lipo, the voltage will drop and it makes the receiver reboot. It could be my lipo's are bad or the CC BEC is not holding voltage or both. However, I just ordered:
- Arizona regulator
- Evo lite 2s 2500
Hope the voltage problem will be solved.
readyheli
12-17-2007, 08:55 AM
FYI Jason as we talked about on the phone... I will host them here on HF you just need to let me know when you can upload them to my FTP server so I can transfer them to the HF server.... Or as you said lety me download them from your FTP server.
This way they arent on Youtube and cant get attacked by loosers like that!
But I still want to know what baggage you all might have carried over here with you all from RCG or where ever... It's best that I know the story so I can help if people come here to BE BAD. PM me and let me know please.
Bob
Bob,
Since its a Team Ready Heli sponsored video, we always put them on our youtube channel first...if Helifreak wants a copy watermarked with Readyheli afterwards, I will talk to Will and you about it, but I dont think it will be a problem.
John
HeliSmith
12-17-2007, 10:10 AM
Finless,
I sent you a PM regarding my perspective of the negative following we have. I do not want a fight to reignite so I am not mentioning certain things on our thread ever again.
Mike
HeliSmith
12-17-2007, 10:15 AM
I know how to bind my receiver. I think, personally, you should make sure you have your travel set on your throttle channel and rebind. That's how I do it so that 0 = -15 for me. I do this to make damn sure my motor turns off. I am not sure this is how Specktrum works but I figured better failsafe then sorry. :D
I am not convinced I didn't have an electrical connection problem or a failing BEC or ESC. My motor wouldn't start for the last flight either! Well it started right up but wouldn't go past 10% throttle or so. I will post what I find to be the problem.
brovic777
12-17-2007, 10:27 AM
Got Long's killer video flying the HOT Synergy N9.
Right Click to Download Video's:
Long flying the Synergy N9 Video (http://schc.servtex.com/HDVids/Long90HD1.5.wmv) 65mb's
this is for rob:
rob, i feel more and more how well of a setup logo you have. you did your research and you did it well. not only is much more reponsive, i would not touch the setup. it does not need more power, it does not need more cyclic or pitch. it doesn't need more of anything at this point other than batteries so you can fly it. im very happy for you and would love to see what you come up with next, if there is something else to be found!
Thanks Jason!!
You are a great "test pilot" and helped me to identify the areas that needed improvement so that I could get it to this level.
I understand that the video was pulled down :DOH Hopefully it can be posted somewhere safer soon. I'm curious to see how it turned out!:YeaBaby:
lowflyer101
12-17-2007, 10:55 AM
long's skill up like rocket. the n9 great in air
Long Nguyen
12-17-2007, 03:39 PM
Thanks for the video Victor! Thanks for the kind words Jean!
After most of people had left the field yesterday, I tried to re-tune my engine and my JR 770T gyro. I succeeded to get my heli fly better . The engine got more power and was cooler. Tail didn't have any wag in backwards anymore. Great!
Rob, under the inspiration of your logo, I decided to choose the logo 500 3D as my next year project. I have wanted an 30 sized or smaller electric since I sold my old Trex 450 couple of months ago. I will be asking you some questions. Here is my planned setup:
Logo 5003D
- Neu 1515/2.5D/F (not H version)
- Castle Creations Phoenix 85HV
- 3 x S9451. These will be taken from my current Synergy N9 and I'll buy 3 BLS451's for it. The BLS451's will be running on 7volts.
- 401 + S9254
- RotoTech 560mm Main Blades. A pair of RotoTech 710mm's is on its way for my Synergy
- Align carbon Paddle's. Are these good?
- K&B tail blades
- Western Robotic HBEC (5A)
- A123 7S 2300mAh/Flightpower 6s 4500mAh
Hope we will have a socal logo club!
Long Nguyen
12-17-2007, 03:48 PM
I wish:
http://rchelisg.com/upload/i_wish.jpg
HeliSmith
12-17-2007, 04:49 PM
Yeah as do we all. Hey I am just happy to have the picture of me in front of them. Thanks Long!
Rob, under the inspiration of your logo, I decided to choose the logo 500 3D as my next year project. I have wanted an 30 sized or smaller electric since I sold my old Trex 450 couple of months ago. I will be asking you some questions. Here is my planned setup:
Logo 5003D
- Neu 1515/2.5D/F (not H version)
- Castle Creations Phoenix 85HV
- 3 x S9451. These will be taken from my current Synergy N9 and I'll buy 3 BLS451's for it. The BLS451's will be running on 7volts.
- 401 + S9254
- RotoTech 560mm Main Blades. A pair of RotoTech 710mm's is on its way for my Synergy
- Align carbon Paddle's. Are these good?
- K&B tail blades
- Western Robotic HBEC (5A)
- A123 7S 2300mAh/Flightpower 6s 4500mAh
Hope we will have a socal logo club!
Long,
That setup is pretty identical to mine. Only questions are:
-The motor as I'm not familiar with that particular Neu. The 500 is geared for an approximate 1100-1300kV motor on 6s. If you don't already own the Neu, save $$ and get the $119- Hacker.
-I've heard some bad reports on the Align paddles and frankly my 80mm V-paddles don't really outperform stock (just look better!). Also get the 440mm 600N flybar.
Welcome to the Logo world. It's been a positive experience for me so far! :thumbup:
Long Nguyen
12-17-2007, 05:05 PM
Rob,
The set up just came out of my head. I have questions for you: do the 0.7 maingear and the mod 0.7 pinions come with the 5003D kit? How about the metal motor mount?
Rob,
The set up just came out of my head. I have question for you: do the 0.7 maingear and the mod 0.7 pinions come with the 5003D kit?
You didn't see my build thread? :confused: It should answer most questions.
http://www.helifreak.com/showthread.php?t=51172
Mine did come w/ 0.7 mod main gear and AL motor plate. You need to buy the pinion for motor/battery you use.
Long Nguyen
12-17-2007, 05:15 PM
Thank you Rob!
I did read your review but not thoroughly...:)
lowflyer101
12-17-2007, 05:22 PM
LONG, most of the OC guys included me whom own logo 10 or 500 love the zpower 30 1100kv
Airboss
12-17-2007, 07:12 PM
LONG, most of the OC guys included me whom own logo 10 or 500 love the zpower 30 1100kv
Long, the Z motor is awsome tons of torque and never bogs. you will love the L500 it flys as fast as the N9 and can stick bang with the best. best of all is how tough this heli is and how easy everything goes together, if your looking for a builders heli this isnt it, but if you want to Kick Azz then its the right one.....Robs set up is perfect copy it.
Jason Chow
12-17-2007, 07:49 PM
next week is oc weekend, where and when and i should be there :thumbup:
Long Nguyen
12-17-2007, 08:04 PM
Jason, I'm going to be there both Saturday and Sunday...no work on Saturday lol!!!
Finless
12-17-2007, 08:38 PM
Long, that is not a lockout that is a low voltage reset. A lockout is when the RX looses the radio signal and it then goes into throttle failsafe. You having a low voltage reset which many people have complained about. A low voltage reset does not go into failsafe but on power back up will go to the BIND position rather than hold the servos like fail safe does. 2 very different outcomes!
John at Readyheli... YES I can water mark them if you like. I see nothing wrong with that but I was just offering to have them in the video section. It really isn't necessary since you have the Readyheli Youtube section.
Bob
Bob