flyinbill1
08-23-2007, 09:34 PM
I have setup the TX gyro function in Auto mode and left the gain at 50% for each flight mode, Normal, ST-1 and ST-2 and Throttle Hold. Is this correct or what should the initial gain be set for each flght mode?
Thanks,
Bill
flyinbill1
08-27-2007, 07:52 PM
Ok, for those of you who also want to know "what should be the initial gyro gain setting for each flight mode using the XP9303 TX and Futaba G401 gyro with S9254 servo?". I flew my Raptor 50 heli yesterday in both hover and fast forward flight and found that 50% gyro gain in each of the flight modes to be just fine. Keep in mind that I didn't perform 3D maneuvers, but I did perform loops, stall turns, and inverted flight with absolutely no problem. Forward flight was at full throttle.
Hope this helps some of you who had the same questions as I.
Bill