PDA

View Full Version : align gyro


njrcbipes
02-10-2005, 05:48 PM
I'm new to helis- got a Trex450 full combo; when adjusting gain setting up on the gyro should the TR servo move? also, doing this limits the servo's travel. Not using radio gain, gyro only plugged into #5 slot in rx. with gain set to 0 servo travels normally.

bighands3d
03-23-2005, 02:32 AM
Yes sounds like the old cube style gyros you'll have to set the gain and then adjust the linkage..

How does this unit work.. 1-10

njrcbipes
03-23-2005, 07:04 PM
Gyro doesn't have 1-10, slotted screwdriver set screw with a - to the left and a + to the right. Been playing with gain setting and linkage setup but can't get enough input to stop heli from spinning with main rotor. Trying to find a heli flyer at one of the local fields to help, but winter just won't quit here in NJ.

bighands3d
03-24-2005, 03:52 AM
I ment scale wise how is it 1-10.. sounds like you need to put a longer arm on your servo to get it to work right.. and make sure you have the pitch slider centered on the tail.. I think your tail pitch slider may not be centered is why it keeps spinning or your head speed is to low.. these micros like a high head speed.

2500-3000rpms..