View Full Version : first hover main blades
jonthefisherman
08-25-2007, 01:34 AM
You guys think I should get some cheap wood main blades for my first hover? I have some MAH carbon blades Id hate to ruin :wink:
Mad3Deez
08-25-2007, 01:48 AM
yes, another good option is the Hirobo silver fiberglass blades at 35 bucks, they even 3d pretty well, I was surprised. I was asked to try some out at IRCHA and they did real well. Shoot Mike an email at mike@motionunlimitedusa.com
jonthefisherman
08-25-2007, 03:36 PM
Ok thanks Danny.
Ade_Law
08-28-2007, 01:59 PM
depends how confident you are in your building and flyign skills.
Ade
i would stick to woodies till you can do forward flight. And once you switch from woodies to lets say fiberglass you will notice a big difference.
eyeflyhelis
08-29-2007, 04:41 AM
i wood stick to woodies until you have pretty much mastered all your basics- inside turns, nose in, backwards flight, inverted hover nose/tail in, and forward and reverse figure 8's inverted.
then go to fiberglass or cf blades
otherwise dont waste your money
Rodney
08-29-2007, 05:30 PM
Dont mean to correct you Danny but I do think those are Century/Funky silver fiberglass blades.
Mad3Deez
08-30-2007, 01:33 AM
You are 100% right Rodney. I had some Hirobo fiberglass blades I had mixed up with them in my head. Thanks.